Home▸Space & Astronomy▸Ion Engine Grid Erosion & Lifetime

Ion Engine Grid Erosion & Lifetime

Interactive gridded ion-thruster cross-section: watch charge-exchange (CEX) ions sputter-erode the accelerator grid over simulated operating hours, and see how beam current density, accel voltage and perveance-driven direct impingement change the predicted grid lifetime.

Space & Astronomy3DAdvanced60 FPS📱 Mobile-adapted🌍 Earth⚡ Plasma⇄ 2D version
Ion Engine Grid Erosion & Lifetime ↗ Open standalone

Gridded ion thrusters don't fail from running out of fuel — they fail because their accelerator grid slowly sputter-erodes away. This simulator zooms in on one representative aperture of the screen and accel grid pair and models the real cause: charge-exchange ions born downstream get pulled back by the accel grid's negative field and sandblast its aperture rim, carving the "pit-and-groove" pattern that eventually ends the grid's service life. Adjust beam current density and accel voltage to change the sputter yield and the charge-exchange erosion rate, switch between xenon and krypton propellant to see how atomic mass changes the wear rate, and push the perveance past its critical value to trigger direct beam impingement — a second, much faster failure mode. A time-acceleration slider fast-forwards the simulated operating clock from zero to tens of thousands of hours so the physically-derived erosion, remaining-life and impingement-risk readouts update live.

⚙ Under the hood

Watch charge-exchange ions sputter-erode a gridded ion thruster's accelerator grid over simulated operating hours — tune beam current density, accel voltage and propellant to see the pit-and-groove erosion rate, the predicted remaining grid life, and how excess perveance triggers direct beam impingement.

ion thrusterelectric propulsiongrid erosionsputteringcharge exchangespacecraft propulsion

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)