low risk
Beam ions (through aperture) CEX ions (pulled back, erode rim) Grid plates
⚠ Couldn't load the 3D engineThree.js failed to load from the CDN. Check your connection and reload.

Ion Engine Grid Erosion & Lifetime

Gridded ion thrusters don't fail from running out of fuel — they fail because their accelerator grid slowly sputter-erodes away. This simulator zooms in on one representative aperture of the screen and accel grid pair and models the real cause: charge-exchange ions born downstream get pulled back by the accel grid's negative field and sandblast its aperture rim, carving the "pit-and-groove" pattern that eventually ends the grid's service life. Adjust beam current density and accel voltage to change the sputter yield and the charge-exchange erosion rate, switch between xenon and krypton propellant to see how atomic mass changes the wear rate, and push the perveance past its critical value to trigger direct beam impingement — a second, much faster failure mode. A time-acceleration slider fast-forwards the simulated operating clock from zero to tens of thousands of hours so the physically-derived erosion, remaining-life and impingement-risk readouts update live.