UV-NIL Capillary Filling & Bubble Defects
Interactive UV nanoimprint lithography simulator: watch resist rise into a grid of nanoscale trench cavities by capillary action, and see how mold descent speed, viscosity and surface tension push the capillary number past the threshold that traps air-bubble defects.
This simulator zooms into a single imprint step of UV nanoimprint lithography: a grid of 49 nanoscale trench cavities filling by capillary action as a transparent mold presses into liquid resist. Instead of animating the press/cool/demold cycle of thermal NIL, it models the physics that actually decides whether the print comes out clean — the capillary number Ca = ηv/γ that pits the mold's descent speed against the resist's viscosity and surface tension. Push Ca too high with a fast descent speed or a thick resist and trenches start sealing air pockets mid-fill; keep it low and every trench fills smoothly from the Washburn capillary-rise law. Live readouts track Ca, the count of trapped-bubble defects, and the fraction of cavities that filled cleanly.
Watch liquid resist wick by capillary action into a grid of 49 nanoscale trench cavities under a UV-nanoimprint mold, and see how mold descent speed, resist viscosity and surface tension push the capillary number past the threshold that seals air-bubble defects into the print.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install