Home▸Engineering & Materials▸Autoclave Consolidation of Carbon-Fiber Prepreg: Darcy Resin Bleed, Gel and Void Risk

Autoclave Consolidation of Carbon-Fiber Prepreg: Darcy Resin Bleed, Gel and Void Risk

Run a carbon-fibre laminate through an autoclave cure cycle and watch resin pressure drain out through the bleeder while the fibre bed takes the load. Set thickness, autoclave pressure, heat-up rate, hold temperature, moisture and permeability; follow viscosity, degree of cure, gel time, consolidation, fibre volume fraction and whether the resin pressure ever drops below the vapour pressure of moisture so that voids can grow. Vessel, tool, plies and gauge modelled in Blender, with finite-difference checks built in.

Engineering & Materials3DModerate60 FPS📱 Mobile-adapted🟠 Blender⇄ 2D version
Autoclave Consolidation of Carbon-Fiber Prepreg: Darcy Resin Bleed, Gel and Void Risk ↗ Open standalone

Run a carbon-fibre laminate through an autoclave cure cycle and watch resin pressure drain out through the bleeder while the fibre bed takes the load. Set thickness, autoclave pressure, heat-up rate, hold temperature, moisture and permeability; follow viscosity, degree of cure, gel time, consolidation, fibre volume fraction and whether the resin pressure ever drops below the vapour pressure of moisture so that voids can grow. Vessel, tool, plies and gauge modelled in Blender, with finite-difference checks built in.

⚙ Under the hood

Run a carbon-fibre laminate through an autoclave cure cycle and watch resin pressure drain out through the bleeder while the fibre bed takes the load. Set thickness, autoclave pressure, heat-up rate, hold temperature, moisture and permeability; follow viscosity, degree of cure, gel time, consolidation, fibre volume fraction and whether the resin pressure ever drops below the vapour pressure of moisture so that voids can grow. Vessel, tool, plies and gauge modelled in Blender, with finite-difference checks built in.

Carbon FiberAutoclaveComposite CureDarcy FlowResin Viscosity

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)