Home▸Engineering & Materials▸Autoclave Consolidation of Carbon-Fiber Prepreg: Pressure Sharing and Cure Cycle

Autoclave Consolidation of Carbon-Fiber Prepreg: Pressure Sharing and Cure Cycle

A through-thickness cutaway of the laminate with the resin-pressure profile, a pressure gauge and cure-cycle graphs of temperature, viscosity, consolidation and void risk. Same shared Terzaghi consolidation and cure model and numerical checks as the 3D version.

Engineering & Materials2DModerate60 FPS📱 Mobile-adapted🟠 Blender⇄ 3D version
Autoclave Consolidation of Carbon-Fiber Prepreg: Pressure Sharing and Cure Cycle ↗ Open standalone

Run a carbon-fibre laminate through an autoclave cure cycle and watch resin pressure drain out through the bleeder while the fibre bed takes the load. Set thickness, autoclave pressure, heat-up rate, hold temperature, moisture and permeability; follow viscosity, degree of cure, gel time, consolidation, fibre volume fraction and whether the resin pressure ever drops below the vapour pressure of moisture so that voids can grow. Vessel, tool, plies and gauge modelled in Blender, with finite-difference checks built in.

⚙ Under the hood

A through-thickness cutaway of the laminate with the resin-pressure profile, a pressure gauge and cure-cycle graphs of temperature, viscosity, consolidation and void risk. Same shared Terzaghi consolidation and cure model and numerical checks as the 3D version.

Carbon FiberAutoclaveComposite CureDarcy FlowResin Viscosity

2D · HTML5 Canvas 2D · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)