Low resin pressure (drained)High resin pressureResin leaving through bleeder
Couldn't start the 3D scene.

Autoclave Consolidation of Carbon-Fiber Prepreg: Darcy Resin Bleed, Gel and Void Risk

Run a carbon-fibre laminate through an autoclave cure cycle and watch resin pressure drain out through the bleeder while the fibre bed takes the load. Set thickness, autoclave pressure, heat-up rate, hold temperature, moisture and permeability; follow viscosity, degree of cure, gel time, consolidation, fibre volume fraction and whether the resin pressure ever drops below the vapour pressure of moisture so that voids can grow. Vessel, tool, plies and gauge modelled in Blender, with finite-difference checks built in.

Made with 🟠 Blender · Three.js