Laminate cutaway: resin pressure (colour) through thickness
Resin pressure vs moisture vapour pressure (void risk)

Autoclave Consolidation of Carbon-Fiber Prepreg: Pressure Sharing and Cure Cycle

Run a carbon-fibre laminate through an autoclave cure cycle and watch resin pressure drain out through the bleeder while the fibre bed takes the load. Set thickness, autoclave pressure, heat-up rate, hold temperature, moisture and permeability; follow viscosity, degree of cure, gel time, consolidation, fibre volume fraction and whether the resin pressure ever drops below the vapour pressure of moisture so that voids can grow. Vessel, tool, plies and gauge modelled in Blender, with finite-difference checks built in.

Made with 🟠 Blender