Home▸Energy & Thermodynamics▸OTEC Cold-Water Pipe Optimizer

OTEC Cold-Water Pipe Optimizer

Size the cold-water pipe of an Ocean Thermal Energy Conversion plant: tune diameter, flow velocity, depth and the surface-to-deep temperature gradient, and watch gross thermal power fight Darcy-Weisbach pumping losses for the net electrical output.

Energy & Thermodynamics3DAdvanced60 FPS📱 Mobile-adapted💧 Water⇄ 2D version
OTEC Cold-Water Pipe Optimizer ↗ Open standalone

Every Ocean Thermal Energy Conversion plant lives or dies on one number: the diameter of its Cold-Water Pipe. This simulator renders a 3D vertical CWP reaching from a floating platform down into the deep, with animated flow showing the pumped cold water in real time, while four controls — pipe diameter, flow velocity, pipe depth and the surface-to-deep temperature gradient — drive a real thermodynamic and fluid-mechanics model. Gross thermal power comes from a Carnot-limited Rankine-cycle estimate on the mass flow and temperature gradient; pumping power comes from the Darcy–Weisbach friction equation with a Blasius turbulent friction factor. Watch net electrical power climb, plateau, and even go negative as you push the pipe too narrow or too fast — the same optimization real OTEC engineers run before pouring concrete.

⚙ Under the hood

Size the cold-water pipe of an Ocean Thermal Energy Conversion plant: tune diameter, flow velocity, depth and the surface-to-deep temperature gradient, and watch gross thermal power fight Darcy-Weisbach pumping losses for the net electrical output.

OTECocean energyfluid dynamicsthermodynamicsrenewable energyengineering

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)