Home▸Space & Astronomy▸Space Life Support Monitoring

3D Cabin Sensor Grid Monitor

Interactive 3D life-support sensor grid simulator: a spatial array of gas sensors inside a cabin lights up as a leak plume diffuses outward, each node latching its own sustained-duration alarm as the reading crosses threshold — see how sensor placement and distance from the leak, not just noise, drive detection delay.

Space & Astronomy3DEasy60 FPS📱 Mobile-adapted⇄ 2D version

A single sensor's alarm logic only tells half the story of a real life-support monitoring network: the other half is where the sensors physically sit relative to a leak. This 3D simulator places twelve gas sensor nodes in a fixed grid throughout a cabin volume and lets you trigger a leak plume that diffuses outward from a random point. Every node reads the local plume concentration plus its own noise and runs an identical threshold + sustained-duration alarm rule, but because the plume has to travel through space, nodes near the leak trip first and distant ones may miss it entirely if it dilutes below threshold before arriving. Tune sensor noise, alarm threshold and sustained duration and watch which nodes catch a leak — and which don't.

⚙ Under the hood

Simulate a 3D cabin with fixed sensor nodes reacting to a leak plume, showing which sensors trigger first based on their proximity to the leak.

spacelife supportsensor simulation

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install