☢️ Nuclear Power Plant Simulator (2D)
2D cut-away dashboard of a pressurised-water nuclear plant: control rods, coolant flow, turbine load, SCRAM, live point kinetics, steam cycle and electric output.
Nuclear power plant simulator: how control rods and coolant flow set reactor power
This 2D cross-section shows a pressurized-water reactor core feeding a steam generator and turbine-generator set. Control rod depth sets the neutron multiplication factor k — pull the rods out and k rises above 1, driving an exponentially growing chain reaction and rising core temperature, while inserting them past the equilibrium point drops k below 1 and shuts the reaction down. Coolant flow rate determines how fast that heat is carried out of the core; balance rod depth against flow to hold a steady k ≈ 1 and a stable power level, or push the core into overheating and watch the safety status flip to warning as core temperature climbs.
2D cross-section of a nuclear reactor core and steam-turbine cycle: control rod depth and coolant flow rate drive a real neutron-multiplication (k-factor) and heat-balance model, with live reactor power, k-factor and core temperature readouts. Cut-away control-room dashboard with live point kinetics (six delayed-neutron groups), Doppler and moderator feedback, decay heat, xenon, steam generator, turbine load, SCRAM, missions and in-page numerical checks.
2D · HTML5 Canvas 2D · 60 FPS target · runs fully client-side, no install