PEM vs SOFC Fuel Cells: Temperature, Conductivity and Efficiency
Put a polymer PEM fuel cell and a ceramic SOFC on one temperature axis and watch ions cross each electrolyte. Sweep temperature, load, humidification and fuel to see Nernst voltage, activation, ohmic and concentration losses, power and efficiency, and why PEM dries out above 100 C while the SOFC only switches on near 600 C. Stacks, furnace and tank modelled in Blender, with numerical checks built in.
Hydrogen fuel cells convert chemical energy straight into electricity by moving an ion across an electrolyte, but which ion, and at what temperature, depends on the chemistry. This simulator puts a low-temperature PEM polymer-membrane cell and a high-temperature solid-oxide cell on one shared temperature axis, so you can watch proton conductivity collapse as the membrane dries out while the oxide-ion conductivity of the ceramic only wakes up hundreds of degrees higher.
Put a polymer PEM fuel cell and a ceramic SOFC on one temperature axis and watch ions cross each electrolyte. Sweep temperature, load, humidification and fuel to see Nernst voltage, activation, ohmic and concentration losses, power and efficiency, and why PEM dries out above 100 C while the SOFC only switches on near 600 C. Stacks, furnace and tank modelled in Blender, with numerical checks built in.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install