Home▸Energy & Thermodynamics▸Hydrogen Fuel Efficiency Comparison

Hydrogen Fuel Cell vs Combustion: Efficiency Duel

Compare two ways to extract hydrogen's chemical energy from the same fuel supply: direct combustion driving a Carnot-limited heat engine versus a PEM fuel cell that splits H2 into protons and electrons and routes the electrons through an external circuit to do work directly, with live efficiency readouts showing why the fuel cell isn't bound by the Carnot ceiling.

Energy & Thermodynamics3DModerate60 FPS🔥 Fire💧 Water
Hydrogen Fuel Efficiency Comparison ↗ Open standalone

This simulator puts two ways of extracting hydrogen's chemical energy from the same fuel supply side by side. On the left, hydrogen burns to drive a Carnot-limited heat engine — a piston, flywheel, hot and cold reservoirs — whose real-world efficiency is capped both by the Carnot ceiling set by your Th/Tc sliders and by a fixed compression-ratio (Otto-cycle) limit plus friction losses. On the right, a PEM fuel cell splits H2 into protons and electrons directly, sending the electrons through an external circuit — represented by the glowing load — with no heat engine and therefore no Carnot ceiling at all; its own theoretical limit comes from the ΔG/ΔH ratio of the hydrogen oxidation reaction, and its real voltage sags with the external load slider through activation, ohmic and concentration losses. Live readouts on both sides make the comparison explicit: watch the fuel cell's real efficiency beat the combustion engine's real efficiency at moderate loads, even while the combustion side's theoretical ceiling looks higher on paper.

⚙ Under the hood

Compare hydrogen efficiency: combustion vs fuel cell in a shared supply, with live readouts of real vs theoretical efficiencies.

Three.jshydrogen fuel cellPEM fuel cellcombustionCarnot efficiencyelectrochemistryheat engine

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)