Home▸Electronics & Circuits▸Breadboard Circuit Bench: Ohm, Kirchhoff, RC Charging and an LED Flasher on a Real Breadboard

Breadboard Circuit Bench: Ohm, Kirchhoff, RC Charging and an LED Flasher on a Real Breadboard

Wire up a breadboard with a supply, four resistors, an electrolytic capacitor and an LED, then watch the solved node voltages colour the jumper wires while charge markers flow with the exact branch currents. Change the source (step, square, sine), the resistors, the capacitor and the LED colour and read the oscilloscope. Kirchhoff's laws are solved by modified nodal analysis with a Newton-iterated diode and a trapezoidal capacitor. The breadboard, parts, bench supply and scope are modelled in Blender.

Electronics & Circuits3DModerate60 FPS📱 Mobile-adapted🟠 Blender⇄ 2D version
Breadboard Circuit Bench: Ohm, Kirchhoff, RC Charging and an LED Flasher on a Real Breadboard ↗ Open standalone

Wire up a breadboard with a supply, four resistors, an electrolytic capacitor and an LED, then watch the solved node voltages colour the jumper wires while charge markers flow with the exact branch currents. Change the source (step, square, sine), the resistors, the capacitor and the LED colour and read the oscilloscope. Kirchhoff's laws are solved by modified nodal analysis with a Newton-iterated diode and a trapezoidal capacitor. The breadboard, parts, bench supply and scope are modelled in Blender.

⚙ Under the hood

Wire up a breadboard with a supply, four resistors, an electrolytic capacitor and an LED, then watch the solved node voltages colour the jumper wires while charge markers flow with the exact branch currents. Change the source (step, square, sine), the resistors, the capacitor and the LED colour and read the oscilloscope. Kirchhoff's laws are solved by modified nodal analysis with a Newton-iterated diode and a trapezoidal capacitor. The breadboard, parts, bench supply and scope are modelled in Blender.

Circuit SimulatorOhm's LawKirchhoff's LawsRC CircuitLED Diode

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)