🧴 Cosmetic Emulsion & Skin Barrier Lab
Interactive 3D cosmetic chemistry lab: switch between an oil-in-water (O/W) and a water-in-oil (W/O) emulsion and watch emulsifier molecules line up head-out/tail-in at each droplet's oil-water interface by HLB. Set a test molecule's molecular weight and log Kow polarity, then run a penetration test through a stratum-corneum brick-and-mortar cross-section driven by the real Potts-Guy skin-permeability regression.
A 3D cosmetic chemistry lab: switch between an oil-in-water (O/W) and a water-in-oil (W/O) emulsion to see emulsifiers orient by HLB, then send a test molecule through a stratum-corneum cross-section at a speed set by the real Potts-Guy skin-permeability equation.
🔬 What It Demonstrates
Emulsifiers are amphiphiles that sit at the oil-water interface, head in the water and tail in the oil. Which side becomes the continuous phase depends on the emulsifier's HLB number: HLB 8–18 stabilizes O/W (oil droplets in water), HLB 3–6 stabilizes W/O (water droplets in oil) — flip the emulsion type to see the head/tail orientation invert at every droplet. On the skin side, the stratum corneum's brick-and-mortar structure forces most molecules to thread around corneocytes through the lipid matrix rather than crossing them directly, and how fast that crossing happens follows the Potts-Guy regression from molecular weight and log Kow, with W/O emulsions getting an occlusion-driven permeability boost.
🎮 How to Use
Press O/W or W/O to rebuild the droplets and watch the emulsifier chains flip orientation. Drag the molecular-weight and log Kow sliders to resize and recolor the test molecule and watch the computed Kp update live. Press Start penetration test to send the molecule zig-zagging through the lipid matrix — bigger, more polar molecules cross far slower than small, moderately lipophilic ones. Reset restores the defaults.
💡 Did You Know?
The "ideal" molecule for skin penetration is often called Lipinski-adjacent for dermal delivery: moderate size, moderate lipophilicity (log Kow around 1–3). Go too hydrophilic and the molecule can't cross the lipid mortar at all; go too lipophilic or too large and it gets stuck in the lipid matrix instead of diffusing through.
Drag to rotate and zoom as you create O/W emulsions, with oil droplets surrounded by water, controlled by emulsifiers' HLB numbers.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install