Kolbe Electrolysis Flow Cell: Mass-Transfer-Limited Conversion and Faradaic Efficiency
Pump a carboxylate solution through a parallel-plate electrolysis cell and watch the Kolbe coupling run out of reactant along the electrode. Change flow rate, concentration, current density, electrode length, gap and kinetics to see conversion, Faradaic efficiency, oxygen waste, gas void fraction, cell voltage and energy per kilogram of ethane. A Blender-built flow cell with a plug-flow model and numerical checks.
Watch a continuous electroorganic flow cell run the Kolbe reaction in real time: carboxylate ions (cyan) are swept along the channel, drift toward the anode plate, and — at a rate set by the applied current density — give up an electron and instantly shed CO2 to become an alkyl radical (orange). Most radicals find a partner and recombine into the dimer product (green) that flows on to the outlet, but at high current density or with a less selective electrode more of them are over-oxidized into non-Kolbe byproducts (red). Tune current density, feed concentration, residence time and anode material and watch current efficiency, cell potential and CO2 evolution respond exactly as the underlying electrochemistry dictates.
Pump a carboxylate solution through a parallel-plate electrolysis cell and watch the Kolbe coupling run out of reactant along the electrode. Change flow rate, concentration, current density, electrode length, gap and kinetics to see conversion, Faradaic efficiency, oxygen waste, gas void fraction, cell voltage and energy per kilogram of ethane. A Blender-built flow cell with a plug-flow model and numerical checks.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install