EN 
Українська
Polski
Español
Deutsch
日本語
Italiano
Português (BR)
Français
العربية
Nederlands
中文
한국어
हिन्दी
Türkçe
Tiếng Việt
Русский
Bahasa Indonesia
فارسی
বাংলা
ไทย
Filipino
Kiswahili
اردو
Bahasa Melayu
தமிழ்
עברית
Ελληνικά
ਪੰਜਾਬੀ
አማርኛ
မြန်မာဘာသာ
ខ្មែរ
ქართული
नेपाली
Монгол хэл
Հայերեն
සිංහල
ລາວ
Čeština
Română
Magyar
Български
Svenska
Dansk
Suomi
Norsk
Slovenčina
Hrvatski
Српски
Slovenščina
Lietuvių
Latviešu
Eesti
Íslenska
Shqip
Македонски
Bosanski
Malti
Azərbaycanca
Қазақша
O'zbekcha
Тоҷикӣ
Кыргызча🔭 Space Telescope — L2 Lagrange Point & Halo Orbit
Interactive simulation of a space telescope at the Sun-Earth L2 Lagrange point. Visualize halo orbits, thermal equilibrium, and compare orbital configurations like Hubble, Webb, and others.
About this simulation
This simulation places a space telescope at the Sun–Earth L2 point, fixed at one astronomical unit from the Sun plus 1.5 million km beyond Earth, and recomputes its physics live from three sliders. Thermal equilibrium uses T_eq = T_sun·√(R_sun / 2d), the true radiative-balance temperature at that solar distance. Enabling the sunshield doesn't move the telescope — it splits it thermally into a Sun-facing side near 1.6×T_eq and a shielded instrument side clamped to about 40 K, matching JWST's real operating temperature. The drawn halo orbit is an ellipse around L2, scaled by the radius slider and stretched 1.5× vertically like an actual 3-axis halo trajectory. Angular resolution follows the diffraction limit θ ≈ 1.22λ/D at λ = 2 µm, while collecting area scales as π(D/2)², so the mirror-diameter slider sharpens resolution and boosts light-gathering power together.
What it shows
The Sun, Earth, Moon and L2 point drawn to a schematic scale along the Sun–Earth line, with the telescope tracing a halo-orbit ellipse around L2, a hexagonally segmented mirror, and a five-layer sunshield that appears whenever shielding is enabled.
How to use it
Click a telescope preset (JWST, Hubble, Herschel, Custom L2) to load its orbit radius, shield state, and mirror size in one step, or drag the three sliders yourself and watch the Thermal & Performance panel update instantly.
Did you know?
JWST's real sunshield is roughly the size of a tennis court. Its five ultra-thin layers drop the temperature by over 250 °C — from a sun-baked +85 °C on the hot side to around −235 °C (about 40 K) on the cold instrument side.
Frequently Asked Questions
What is the Sun–Earth L2 Lagrange point and why do telescopes orbit there?
L2 is a point roughly 1.5 million km beyond Earth (away from the Sun) where the combined gravity of the Sun and Earth, plus the centrifugal effect of orbiting alongside Earth, lets a spacecraft stay in near-constant alignment with both bodies. From L2, a single sunshield can block the Sun, Earth, and Moon at the same time, so an infrared observatory like JWST can passively radiate its heat away and cool to cryogenic temperatures without any onboard refrigeration.
Why does the telescope orbit L2 in a halo orbit instead of sitting exactly at the point?
L2 itself is an unstable equilibrium along the Sun–Earth line — a telescope parked exactly there would drift away and require constant fuel to correct. Instead, real telescopes (and this simulation) fly a large halo orbit around L2, which keeps the Sun, Earth, and Moon reliably behind the sunshield while needing only small course-correction burns every few weeks, and gives the ~6-month orbital period this simulator reports.
How does the simulator calculate the hot-side and cold-side temperatures?
It first computes the equilibrium blackbody temperature at the telescope's fixed Sun distance, T_eq = T_sun·√(R_sun/2d), using the Sun's surface temperature (5778 K) and radius. If the sunshield is off, both sides sit near this T_eq. Turning the shield on splits the telescope thermally: the Sun-facing side heats to roughly 1.6×T_eq (close to JWST's real +85 °C sunshield-facing layer), while the shielded instrument side is clamped near 40 K — matching JWST's actual mid-infrared operating temperature.
What determines the telescope's angular resolution in the simulation?
Angular resolution is computed from the diffraction limit, θ ≈ 1.22λ/D, evaluated at an infrared wavelength of 2 µm and reported in arcseconds. Because D is the mirror-diameter slider, a bigger mirror shrinks θ (sharper images) while simultaneously increasing the collecting area π(D/2)² shown in the Performance panel — the same trade-off that drives real observatories toward larger primary mirrors.
Are the preset telescope configurations (JWST, Hubble, Herschel) realistic?
They are simplified illustrations, not exact mission specs. The JWST preset (800,000 km halo radius, shield on, 6.5 m mirror) is close to the real observatory. Hubble is included without a shield and with its actual 2.4 m mirror purely for comparison — in reality Hubble orbits low Earth orbit, not L2. Herschel's preset approximates a passively cooled L2 infrared telescope at reduced mirror scale rather than reproducing its full 3.5 m aperture.
Interactive simulation of a space telescope at the Sun-Earth L2 Lagrange point. Visualize halo orbits, thermal equilibrium, and compare orbital configurations like Hubble, Webb, and others.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install