In-Space 3D Printing: Layer Bonding, Radiative Cooling and the Glass Transition
Build a printed part layer by layer in a space-station cell and watch each bead cool by convection or by radiation alone. Change print speed, path length, nozzle temperature, layer height and the environment (Earth air, station cabin, shaded vacuum, heated enclosure) to see how long the joint stays above the glass transition and how strong the weld between layers becomes. Printer cell, head and spool modelled in Blender, with numerical checks built in.
Space stations can't ship a spare bracket next-day — so orbital 3D printers build spacecraft parts on demand, one molten bead at a time, in an environment with no gravity to help or hinder the process. This simulator renders a real FDM print head laying down a spiral toolpath that builds a lattice bracket layer by layer, driving extrusion width from volumetric flow conservation and interlayer bond strength from Newton's law of cooling — including the microgravity twist that without buoyancy-driven convection, beads cool more slowly than on Earth, changing how hot, fast and thick you can safely print. Four controls (nozzle temperature, print speed, layer height, chamber temperature) feed the live bond-strength bar, extrusion-width readout and estimated print time exactly as they would on a real orbital printer's control panel.
Build a printed part layer by layer in a space-station cell and watch each bead cool by convection or by radiation alone. Change print speed, path length, nozzle temperature, layer height and the environment (Earth air, station cabin, shaded vacuum, heated enclosure) to see how long the joint stays above the glass transition and how strong the weld between layers becomes. Printer cell, head and spool modelled in Blender, with numerical checks built in.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install