About This 3D Simulation
A Kaplan turbine is an axial-flow reaction turbine designed to extract useful energy from moving water, especially where a hydropower site offers a relatively low hydraulic head and a substantial water discharge. Its distinctive runner resembles a ship's propeller, but unlike an ordinary fixed-pitch propeller, a Kaplan turbine can adjust the angle of its runner blades while it operates. Together with adjustable guide vanes, this gives the machine an unusually flexible way to respond to changing river conditions.
This interactive Kaplan turbine simulation reveals the major stages of that energy conversion. Water approaches the runner through an intake region and a ring of guide vanes. These vanes regulate admission and guide the water toward the rotating blades. The runner transfers a portion of the water's hydraulic energy into shaft rotation, and a coupled generator converts mechanical energy into electrical power. Downstream, a draft tube returns the water toward the tailrace while helping recover some of its remaining kinetic energy.
The model is arranged as an exposed engineering exhibit, with a semi-transparent housing, metallic rotor, guide mechanism, vertical drive shaft and generator. Animated blue particles show the intended direction of water travel. Rotate or zoom the camera to examine the assembly from above, below or the side. Click individual parts to read short component explanations, hide the outer cutaway, or enable automatic camera orbit to study the overall layout.
Five controls turn the scene into a small learning laboratory. Increase net head to investigate its direct influence on available hydraulic power. Change the available inflow or guide vane opening to vary the water admitted to the runner. Adjust blade pitch to see how a simplified turbine efficiency curve responds when the blades move away from a preferred setting. Animation speed affects only the visual playback rate, not the power calculation. The accompanying dashboard recalculates hydraulic input, estimated electrical output, admitted flow and a representative runner-speed indicator.
Real hydropower engineering depends on measured efficiency maps, site-specific water levels, cavitation limits, mechanical stresses and electrical controls. This exhibit deliberately simplifies those interactions so that learners can isolate the most important relationships. It is suitable for introductory fluid-machinery courses, museum demonstrations, classroom discussions and anyone curious about how flowing water becomes electricity.