FLUID MACHINERY / INTERACTIVE EXPERIMENT 001

THE SCIENCE OF MOVING WATER

Kaplan Turbine
3D Simulator.

Step inside a working hydroelectric turbine. Explore its rotating runner, adjustable guide vanes and generator, then see how water head, flow and blade pitch shape the power it can produce.

MODEL TYPEAxial-flow reaction turbine
CONTROL VARIABLES4 physical parameters
ENERGY RELATIONSHIPP = ρ × g × Q × H × η
SCROLL TO INTERACTWEBGPU / WEBGL 2 FALLBACKBUILT FOR DISCOVERY
01 / LIVE EXPERIMENT

Explore the machine.

Adjust the conditions. Observe the mechanism. Compare the results.

INITIALIZING MODEL
FIG. 01 / KAPLAN ASSEMBLYINITIALIZING GRAPHICS
DRAG TO ORBIT · SCROLL TO ZOOM · CLICK TO INSPECT— FPS
COMPONENT INSPECTORExplore the components

Click a component in the 3D model to learn what it does.

02 / OVERVIEW
BEHIND THE MACHINE

About This 3D Simulation

A Kaplan turbine is an axial-flow reaction turbine designed to extract useful energy from moving water, especially where a hydropower site offers a relatively low hydraulic head and a substantial water discharge. Its distinctive runner resembles a ship's propeller, but unlike an ordinary fixed-pitch propeller, a Kaplan turbine can adjust the angle of its runner blades while it operates. Together with adjustable guide vanes, this gives the machine an unusually flexible way to respond to changing river conditions.

This interactive Kaplan turbine simulation reveals the major stages of that energy conversion. Water approaches the runner through an intake region and a ring of guide vanes. These vanes regulate admission and guide the water toward the rotating blades. The runner transfers a portion of the water's hydraulic energy into shaft rotation, and a coupled generator converts mechanical energy into electrical power. Downstream, a draft tube returns the water toward the tailrace while helping recover some of its remaining kinetic energy.

The model is arranged as an exposed engineering exhibit, with a semi-transparent housing, metallic rotor, guide mechanism, vertical drive shaft and generator. Animated blue particles show the intended direction of water travel. Rotate or zoom the camera to examine the assembly from above, below or the side. Click individual parts to read short component explanations, hide the outer cutaway, or enable automatic camera orbit to study the overall layout.

Five controls turn the scene into a small learning laboratory. Increase net head to investigate its direct influence on available hydraulic power. Change the available inflow or guide vane opening to vary the water admitted to the runner. Adjust blade pitch to see how a simplified turbine efficiency curve responds when the blades move away from a preferred setting. Animation speed affects only the visual playback rate, not the power calculation. The accompanying dashboard recalculates hydraulic input, estimated electrical output, admitted flow and a representative runner-speed indicator.

Real hydropower engineering depends on measured efficiency maps, site-specific water levels, cavitation limits, mechanical stresses and electrical controls. This exhibit deliberately simplifies those interactions so that learners can isolate the most important relationships. It is suitable for introductory fluid-machinery courses, museum demonstrations, classroom discussions and anyone curious about how flowing water becomes electricity.

03 / ENGINEERING
THE PRINCIPLES

How It Works

From hydraulic head to useful power

Hydraulic head represents the useful energy difference per unit weight of water between the turbine's upstream and downstream conditions. Water discharge is the volume passing the turbine each second. An introductory expression for available hydraulic power is Phydraulic = ρgQH, where ρ is water density, g is gravitational acceleration, Q is discharge in cubic metres per second and H is net head in metres. The model uses ρ = 1,000 kg/m³ and g = 9.81 m/s². Dividing the result in watts by one million gives megawatts. The estimated electrical output is hydraulic power multiplied by an illustrative combined efficiency.

Guide vanes and the runner

The guide vanes, sometimes called wicket gates, sit upstream of the rotating runner. Their opening regulates how much of the available inflow reaches the blades, while their orientation influences the water's direction and angular momentum. In this demonstration, a gate-opening percentage scales admitted flow through a deliberately simple nonlinear relationship. It is not a calibrated gate-discharge curve. The runner has adjustable blades: changing their pitch alters the angle at which water meets the blade surfaces. Real Kaplan turbine governors coordinate guide vane position and blade pitch to achieve good efficiency over a range of operating conditions.

What the animated parts represent

The metal runner rotates around a vertical shaft connected to a generator mounted above the flow passage. A simplified drivetrain and generator body are shown to make the energy path easy to follow. The blue tracer particles indicate the approach, downward passage and swirling motion of water; they are not individual simulated fluid parcels and do not represent a validated velocity field. The transparent enclosure is a teaching cutaway rather than an exact manufacturing drawing. The draft tube shown beneath the runner signifies the expanding downstream passage that can help slow the departing water and recover pressure.

Reading the performance dashboard

Begin with a head of 18 m, available flow of 85 m³/s and guide vane opening of 74%. The display calculates admitted discharge first, then hydraulic input and estimated output. The efficiency curve rewards blade pitch near a model-specific preferred angle, with additional penalties for extreme gate settings and low flow. These penalties are illustrative, not measured data from any specific Kaplan unit. The displayed runner speed is a representative visual indicator derived from operating conditions; real turbine speed is constrained by generator type, grid frequency, pole count and the governing system. The animation-speed slider is intentionally decoupled from all energy calculations.

Practical engineering boundaries

A real design would require the full turbine hill chart, site geometry, hydraulic losses, flow measurements, generator characteristics and transient operating limits. Cavitation, draft-tube instability, pressure surges, sediment abrasion, bearing loads and electrical faults are outside this model. The simulator therefore illustrates proportional relationships and qualitative control behavior rather than predicting exact performance. Use it to compare scenarios and understand why double regulation is valuable, not to specify equipment or establish safe operating points.

04 / FIELD GUIDE
GET STARTED

How to Use This Simulation

01

Explore the structure

Drag across the 3D viewer to orbit the turbine. Scroll or pinch to zoom. Click a visible part to inspect it, and use Reset view to return to the starting perspective.

02

Change the water conditions

Raise or lower Net water head and Available inflow. Move Guide vane opening to vary how much water enters the runner. Observe both hydraulic input and electric output.

03

Tune the blade pitch

Move Runner blade pitch through its available angles. Watch the displayed illustrative efficiency and estimated output change. Compare results at several guide-vane settings.

04

Control the demonstration

Pause or resume motion, change visual animation speed, toggle housing visibility or component labels, and switch automatic camera orbit on or off. Reset all restores the original parameters.

05 / QUESTIONS & ANSWERS

Frequently Asked Questions

Ten detailed answers about Kaplan turbine design, operation and simulation.

10 QUESTIONS
What is a Kaplan turbine, and why is it used in hydropower plants?

A Kaplan turbine is a water-driven reaction turbine with a propeller-like runner whose blades can change pitch. It is particularly useful at hydropower sites that have relatively low head and high water flow, such as many river and run-of-river installations. Water moves through stationary guide vanes before passing the rotating runner, transferring energy to a shaft connected to an electrical generator. By adjusting both the guide vanes and runner blades, operators can maintain useful performance as discharge and operating conditions vary. A Kaplan turbine is not the right choice for every site: high-head applications may favor other turbine families, and final selection depends on site measurements, efficiency, cost, environmental requirements and engineering studies.

How does a Kaplan turbine convert flowing water into electricity?

The conversion occurs in several stages. First, the difference in hydraulic head between the upstream and downstream water supplies the potential for energy extraction. Guide vanes direct and regulate water entering the runner. As water flows through the rotating blades, forces on their surfaces produce torque, which turns the turbine shaft. That shaft drives an electrical generator, where electromagnetic induction converts mechanical rotation into electricity. Some energy is lost through hydraulic friction, turbulence, bearings and electrical resistance, so output is lower than the available hydraulic input. The simulator illustrates this chain with animated particles, a rotating shaft and a calculated output. Actual machines also use governors, protection systems and electrical controls not modeled here.

What are the main components of the 3D Kaplan turbine model?

The 3D assembly highlights the adjustable runner blades, central runner hub, guide vanes, turbine casing, vertical drive shaft, generator and draft tube. The runner blades are the moving surfaces that receive energy from the directed water. Guide vanes sit around the intake and regulate the flow approaching the runner. The shaft transmits rotational motion toward the generator, while the draft tube represents the downstream water passage that can recover some residual kinetic energy. The semi-transparent shell exposes these normally enclosed mechanisms for educational viewing. The model intentionally omits many small parts—including seals, bearings, lubrication pipes, actuators and detailed generator windings—to keep the principal energy-transfer components visible and understandable.

What scientific principles determine the power of a Kaplan turbine?

The most direct starting point is the hydraulic-power equation P = ρgQH, where water density, gravity, discharge and net head determine the available hydraulic energy per second. The turbine and generator cannot convert all of that energy into electricity, so electrical output is estimated by multiplying hydraulic power by an overall efficiency factor. Conservation of energy explains why output must be smaller than input, while conservation of angular momentum helps explain how water changes the runner's rotational motion. Real Kaplan analysis also uses velocity triangles, blade-flow incidence, pressure distributions and measured turbine efficiency maps. This simulation applies a simplified efficiency relationship rather than solving the full three-dimensional flow field around the blades.

Where are Kaplan turbines commonly installed in the real world?

Kaplan turbines are frequently considered for low-head, high-discharge hydroelectric stations, including river dams and some run-of-river facilities. Their adjustable blades allow them to operate across changing flow conditions, which can be beneficial where river discharge varies seasonally. Individual plants may use vertical or horizontal machine arrangements and different intake layouts depending on civil-engineering constraints. Kaplan-type designs are also closely related to some bulb and tubular turbine configurations used in low-head schemes. Choosing a turbine requires more than matching broad head and flow ranges: engineers also consider fish passage, sediment, flood management, maintenance access, grid connection, operating schedule and the economics of the entire generating station.

How do blade pitch and wicket gate opening affect turbine efficiency?

Runner blade pitch sets the orientation of each moving blade relative to the approaching water, while wicket gate opening regulates discharge and helps establish the flow direction. In a real double-regulated Kaplan turbine, these two settings are coordinated using an operating relationship developed from testing and commissioning. A poor combination may increase losses and reduce useful torque, even if substantial water continues through the machine. In this simulator, guide vane opening determines an approximate admitted-flow fraction, and blade pitch influences an illustrative efficiency curve. The numerical optimum is a teaching assumption, not a universal angle for Kaplan turbines. Real best-efficiency settings depend on head, flow, speed, runner geometry and plant-specific measurements.

How can I perform an experiment with the interactive 3D simulator?

Start with the default values and record the displayed hydraulic input, admitted flow, estimated electrical power and efficiency. Next, change only one parameter at a time. For example, hold available inflow, gate opening and blade pitch constant while increasing net head. The simple power equation predicts a roughly proportional increase in hydraulic input when discharge stays fixed. Return to the starting position, then vary gate opening to examine its effect on admitted flow. Finally, hold all other sliders steady and adjust blade pitch to explore the model's efficiency curve. Use Pause to freeze motion for close inspection, but remember that the calculated dashboard is a steady-state estimate and does not model startup transients.

What happens when water head or available inflow increases?

Within the assumptions of this model, increasing net head raises the energy available from each cubic metre of water, while increasing available inflow raises the amount of water that can potentially enter the turbine. Hydraulic input therefore increases with head and admitted discharge according to P = ρgQH. The guide-vane setting matters because it controls what fraction of available inflow is admitted. Estimated electrical power also depends on the model's efficiency factor. At an actual hydropower station, changing head or flow can alter cavitation risk, hydraulic losses, blade incidence and safe operating limits. The simplified simulator does not capture those complex limits, so higher displayed power should not be interpreted as automatically safer or achievable.

Does this simulation reproduce real turbine speed, cavitation and fluid dynamics?

No. The model presents an educational visualization with approximate steady-state power relationships, not a validated engineering analysis. The animated blue particles suggest the general water path and swirl, but they do not result from a computational fluid dynamics calculation. The displayed runner speed is a visual operating indicator based on the selected conditions; a real synchronous generator usually operates at a speed linked to grid frequency and pole count. The simulation does not resolve cavitation bubbles, unsteady pressure waves, fluid-structure interaction, fatigue or full three-dimensional flow. These phenomena require specialized analysis, measured data and professional review. The distinction is important when using the demonstration for teaching rather than plant planning.

Why do real Kaplan turbines need coordinated blade and guide-vane control?

A Kaplan turbine can encounter different combinations of head, discharge and electrical demand over its operating life. If the guide vanes change the incoming flow without a suitable adjustment to runner blade pitch, the relative flow angle at the blades can become unfavorable, producing additional losses and potentially undesirable vibration or loading. Coordinated control helps the turbine remain near efficient operating regions while respecting mechanical and hydraulic constraints. In practice, the control relationship is derived from performance tests and can be combined with a governor, generator controls and plant-level operating rules. This simulator separates the two controls deliberately, so learners can see the qualitative effects of mismatched settings before exploring the concept of real double regulation.

Made with 🤖 ChatGPT · Three.js