Rail Hopper-Car Loading: Fill Profile Along the Car, Repose Slope and Gate Cut-Off (2D)
A side section of a hopper car filling under the chute: the same shared model as the 3D scene, with the load profile, the flat-fill level q over v, repose-limited heaps, spill and the gate cut-off, plus numerical checks.
Load a rail hopper car under a fixed chute while the train creeps past. Change flow rate, train speed, angle of repose, density, stream footprint and drop height, and watch the load profile build up along the car: a flat blanket of height Q over rho W v, slope-limited heaps, spillage over the sides, centre-of-gravity offset, and the gate cut-off that hits the target payload once material in the air is accounted for. A Blender-built loadout silo, car and track, with numerical checks built in.
A side section of a hopper car filling under the chute: the same shared model as the 3D scene, with the load profile, the flat-fill level q over v, repose-limited heaps, spill and the gate cut-off, plus numerical checks.
2D · HTML5 Canvas 2D · 60 FPS target · runs fully client-side, no install