Home▸Engineering & Materials▸Inkjet Ink Printability Window: Ohnesorge Number, Ligament Breakup Time and Satellite Drops

Inkjet Ink Printability Window: Ohnesorge Number, Ligament Breakup Time and Satellite Drops

Which inks can an inkjet head actually print? Set the jet speed, pulse length, nozzle size and ink viscosity, surface tension and density to see the Ohnesorge and Weber numbers, the printability window 1 < Z < 10, the Rayleigh-Plateau growth rate of the ejected column, its breakup time against the flight time, and whether you get one drop, satellites or an unbroken thread. A Blender-built print head and substrate, with independent numerical checks.

Engineering & Materials3DAdvanced60 FPS📱 Mobile-adapted🟠 Blender💧 Water⇄ 2D version
Inkjet Ink Printability Window: Ohnesorge Number, Ligament Breakup Time and Satellite Drops ↗ Open standalone

Drop-on-demand piezoelectric printheads fire millions of droplets a second by driving a bipolar pull-push voltage waveform across a piezo actuator bonded to an ink chamber. This simulator models the nozzle, the actuator and the resulting jet in 3D: adjust drive voltage, dwell time, ink viscosity and surface tension and watch the dimensionless Ohnesorge number decide the outcome in real time — no ejection when viscosity dominates, a clean single droplet in the printable window, or satellite droplets when the ligament outruns surface tension's ability to pinch it off cleanly.

⚙ Under the hood

Which inks can an inkjet head actually print? Set the jet speed, pulse length, nozzle size and ink viscosity, surface tension and density to see the Ohnesorge and Weber numbers, the printability window 1 < Z < 10, the Rayleigh-Plateau growth rate of the ejected column, its breakup time against the flight time, and whether you get one drop, satellites or an unbroken thread. A Blender-built print head and substrate, with independent numerical checks.

inkjetpiezoelectricfluid-dynamicsdroplet-formationprintingmicrofluidicsInkjet PrintingOhnesorge NumberRayleigh-Plateau InstabilityPrintability WindowDroplet Ejection

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)