Pump Affinity Laws: Variable-Speed Drive vs Throttling Valve
Two identical pump skids deliver the same building-load flow all day: one throttles with a valve at full motor speed, the other slows its motor with a variable-speed drive. Pump-curve and system-curve operating points are solved live, with electric power, daily energy and annual saving read out. Skids modelled in Blender, with numerical checks built in.
Industrial pumps, fans and compressors are usually sized for peak demand, but most of the time a process needs less than full flow. This simulator compares the two common ways to deliver less flow: closing a throttling valve while the motor keeps spinning at full speed, or slowing the motor itself with a variable-frequency drive (VFD). Because pump shaft power follows the cube of impeller speed (the affinity laws), the two methods produce very different electricity bills for the exact same reduction in flow. Adjust the target flow rate and switch control methods to watch the 3D pump, live power readout and power-vs-flow chart respond.
Two identical pump skids deliver the same building-load flow all day: one throttles with a valve at full motor speed, the other slows its motor with a variable-speed drive. Pump-curve and system-curve operating points are solved live, with electric power, daily energy and annual saving read out. Skids modelled in Blender, with numerical checks built in.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install