Home▸Chemistry & Materials▸Fire Triangle & Extinguishing Agents

Fire Triangle & Extinguishing Agents

Interactive 3D combustion chemistry simulator: burn a fire triangle (fuel + oxygen + heat) plus chain-reaction, and put it out with water, CO2, foam or dry chemical powder — with real warnings against water on oil and electrical fires.

Chemistry & Materials3DEasy60 FPS🔥 Fire 💧 Water

Details

CategoryChemistry & Materials

RenderingThree.js · WebGL

DifficultyEasy

Target FPS60

ControlsFire-type buttons (Ordinary / Oil-grease / Electrical) change the burning fuel source; agent buttons (Water / CO2 / Foam / Dry powder) select the extinguishing agent; Apply agent removes the corresponding fire-triangle factor or triggers a warning and flare-up if the agent is unsafe for that fire type; Reset fire restores full combustion.

Three.jscombustion chemistryfire trianglechain reactionextinguishing agentsparticle system

Related simulations

Altitude Range: A Ballistic Analysis SimulatorFire the same shell from sea level and from a chosen firing altitude side by side, watching…

Mountain Ballistics SimulatorFire across a mountain valley and see how thinner high-altitude air and a steep…

Crisis and Emergency Management for Beekeeping OperationsAn interactive 3D apiary yard where you trigger pesticide drift, wildfire, flood or storm… ⊞ All 479 in Chemistry & Materials →

A 3D combustion chemistry sandbox: a particle flame burns as long as fuel, oxygen, heat and an active chain reaction are all present. Pick a fire type — ordinary combustibles, hot oil/grease, or live electrical — then apply water, CO₂, foam or dry chemical powder and watch which leg of the fire triangle each agent actually removes, including the realistic flare-up that results from using the wrong agent on the wrong fire.

⚙ Under the hood

3D combustion chemistry simulator built on the fire triangle plus chain reaction: fuel, oxygen, heat and free-radical chain propagation. Pick a fire type (ordinary, oil/grease or electrical), apply water, CO2, foam or dry chemical powder, and watch which factor each agent removes, including realistic flare-ups from using the wrong agent (water on oil or on live electrical equipment).

Three.jscombustion chemistryfire trianglechain reactionextinguishing agentsparticle system

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install