⚗ Contact Process: Sulfuric Acid Plant Simulator
3D walkthrough of the Contact Process for sulfuric acid: sulfur burns to SO2, a V2O5 catalyst bed converts SO2 to SO3 under a temperature you control, and SO3 is absorbed into 98% H2SO4 to form oleum then product acid. A live equilibrium-conversion-vs-temperature chart shows the Le Chatelier trade-off.
A 3D walkthrough of how the world makes its highest-tonnage industrial chemical: sulfur burns to SO2, a V2O5 catalyst bed converts it to SO3 at a temperature you control, and SO3 is absorbed into 98% sulfuric acid to make oleum and product acid — with a live chart showing the real equilibrium-versus-temperature trade-off.
🔬 What It Demonstrates
The catalytic step 2SO2 + O2 ⇌ 2SO3 is exothermic, so Le Chatelier's principle says a hotter converter shifts the equilibrium back toward SO2, capping the maximum possible conversion. But the V2O5 catalyst barely works below about 400°C, so real plants run near 400–450°C — the sweet spot between "fast enough" and "favourable enough" that the equilibrium and actual-conversion curves trace out live on the chart.
🎮 How to Use
Drag the Converter temp slider (380–620°C) to see the equilibrium-conversion and actual-conversion curves shift and to change what fraction of SO2 particles turn into SO3 as they cross the catalyst bed. Press Start process to watch sulfur burn, SO2 flow through the converter, and SO3 get absorbed into the acid tower. Reset clears every particle and running total.
💡 Did You Know?
SO3 is never absorbed straight into water — it reacts so violently with moisture that it forms an uncontrollable corrosive mist. Real plants absorb it into already-concentrated (98%) sulfuric acid instead, forming oleum, which is then carefully diluted to the acid strength customers actually order.
Control the temperature in a sulfur dioxide oxidation reactor to convert SO2 to SO3 using a vanadium(V) oxide catalyst.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install