← 🧪 Chemistry

⚗ Contact Process

Phase: Burner
Equilibrium conv.: —
Actual conv.: —
S burned: 0
SO2 produced: 0
SO3 absorbed: 0
H2SO4 output: 0.0 t
Running conv.: —
Conversion vs. converter temperature
Equilibrium max Actual (kinetic × equil.)
Drag — rotate · Scroll — zoom

⚗ Contact Process: Sulfuric Acid Plant Simulator

A 3D walkthrough of how the world makes its highest-tonnage industrial chemical: sulfur burns to SO2, a V2O5 catalyst bed converts it to SO3 at a temperature you control, and SO3 is absorbed into 98% sulfuric acid to make oleum and product acid — with a live chart showing the real equilibrium-versus-temperature trade-off.

🔬 What It Demonstrates

The catalytic step 2SO2 + O2 ⇌ 2SO3 is exothermic, so Le Chatelier's principle says a hotter converter shifts the equilibrium back toward SO2, capping the maximum possible conversion. But the V2O5 catalyst barely works below about 400°C, so real plants run near 400–450°C — the sweet spot between "fast enough" and "favourable enough" that the equilibrium and actual-conversion curves trace out live on the chart.

🎮 How to Use

Drag the Converter temp slider (380–620°C) to see the equilibrium-conversion and actual-conversion curves shift and to change what fraction of SO2 particles turn into SO3 as they cross the catalyst bed. Press Start process to watch sulfur burn, SO2 flow through the converter, and SO3 get absorbed into the acid tower. Reset clears every particle and running total.

💡 Did You Know?

SO3 is never absorbed straight into water — it reacts so violently with moisture that it forms an uncontrollable corrosive mist. Real plants absorb it into already-concentrated (98%) sulfuric acid instead, forming oleum, which is then carefully diluted to the acid strength customers actually order.