Home▸Aerospace Engineering & Orbital Mechanics▸Fly-by-Wire Control Law Simulator

Fly-by-Wire Control Law Simulator

Fly a fly-by-wire aircraft through a real rate-command roll law and a load-factor pitch law with high-angle-of-attack and bank-angle envelope protection — toggle Normal Law vs Direct Law and watch the control surfaces, bank, AoA, load factor and sideslip respond in real time.

Aerospace Engineering & Orbital Mechanics3DAdvanced60 FPS📱 Mobile-adapted⇄ 2D version
Fly-by-Wire Control Law Simulator ↗ Open standalone

Modern airliners don't wire the stick to the control surfaces — a flight-control computer sits in between, turning stick deflection into a commanded roll rate and a commanded load factor, then driving the ailerons, elevator and rudder to satisfy that command while quietly enforcing an envelope the airframe cannot leave. This simulator implements that architecture directly: a rate-command roll law with a bank-angle limit, a C*-style pitch law that commands vertical g rather than elevator angle, high-angle-of-attack protection that overrides aft stick before the wing can stall, and a yaw damper that automatically coordinates turns. Toggle between Normal Law (protected) and Direct Law (stick-to-surface, unprotected) to feel the difference — in Direct Law the same aft-stick input that Normal Law would refuse can drive the aircraft straight into a stall.

⚙ Under the hood

Fly a fly-by-wire jet through a real rate-command roll law and a load-factor pitch law with high-angle-of-attack and bank-angle envelope protection, then toggle Normal Law vs Direct Law to see what the flight-control computer normally prevents.

aerospacefly-by-wireflight-controlsaerodynamicscontrol-systemsenvelope-protection

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)