Home▸Physics & Mechanics▸Foucault Pendulum 3D Simulation | Earth Rotation Lab

🔬 Foucault Pendulum 3D Simulation | Earth Rotation Lab

Explore a detailed 3D Foucault pendulum. Change latitude, cable length, damping and Earth rotation to understand physics through interactive experiments.

Physics & Mechanics3DModerate60 FPS📱 Mobile-adapted🤖 ChatGPT
Foucault Pendulum 3D Simulation | Earth Rotation Lab ↗ Open standalone
FURTHER QUESTIONS

Frequently Asked Questions

Ten detailed explanations of the physics, mechanics and limitations behind the experiment.

01What does a Foucault pendulum actually prove?

A Foucault pendulum provides a direct mechanical demonstration that the ground beneath it rotates. A carefully released, sufficiently long pendulum tends to keep its swing plane oriented relative to inertial space. The laboratory floor moves with Earth, so the swing direction appears to drift relative to marked directions on that floor. The effect is not an invisible motor turning the pendulum; it arises because the observer is inside a rotating reference frame. In this simulation the floor dial is the Earth-fixed reference and the brass bob is the moving oscillator. It makes the central argument visible, although the teaching model is simpler than a full research-grade apparatus.

02Why does the precession rate depend on latitude?

Only the local vertical component of Earth’s angular velocity makes the swing plane turn relative to the horizontal floor in the ideal Foucault analysis. That component equals Earth’s angular speed multiplied by the sine of geographic latitude. It is greatest in magnitude at the poles and zero at the equator. At a northern latitude the observed orientation rotates in one direction; at the matching southern latitude it rotates in the opposite direction. A setting near 52° north gives a natural drift of roughly twelve degrees per hour. Try moving the latitude slider from zero to ninety degrees while keeping the cable length and release angle unchanged to isolate the latitude effect.

03What are the functions of the bob, cable, pivot and floor dial?

The bob is a concentrated mass that makes the pendulum’s motion easy to follow and keeps a useful amount of inertia. The cable fixes the distance between the bob and the support point, while an ideal low-friction pivot lets the pendulum swing in more than one vertical plane. A real exhibit must also minimise vibration, air currents, and asymmetric support forces. The compass-style floor dial serves a different purpose: it provides marks that rotate with the building, so viewers can compare the swinging motion to their Earth-bound surroundings. In the 3D scene, clicking each major component opens a short explanation. The dome itself is decorative and is not part of the physics equations.

04How does the Coriolis effect appear in the mathematical model?

The Coriolis effect appears when motion is described in a coordinate system attached to a rotating body such as Earth. For horizontal velocities, the simplified acceleration is perpendicular to the velocity and has a coefficient f = 2Ω⊕ sin(φ), sometimes called the Coriolis parameter. The model couples eastward and northward motion through terms proportional to the other direction’s velocity. It also includes gravitational restoring acceleration and optional linear damping. A perpendicular Coriolis force changes the direction of velocity without directly adding mechanical energy. The animation numerically integrates these equations in small time steps. The boost control scales the Coriolis coefficient for teaching and therefore does not reproduce the exact dynamics of a real, unboosted pendulum.

05How does pendulum length change its period?

For a small swing angle, the period of a simple pendulum is approximately T = 2π√(L/g), where L is the effective length and g is local gravitational acceleration. Doubling the length increases the period by a factor of √2 rather than doubling it. In this observatory, moving the length slider between ten and eighteen metres updates the projected period and the suspension geometry. The pendulum is released again when you change length, so the initial amplitude remains well defined. The simple formula omits finite-angle corrections, cable flexibility, and nonuniform gravity. It also shows why replacing the brass bob with a different mass would not substantially alter the ideal small-angle period.

06How quickly would this pendulum precess in a real museum?

Real-world Foucault precession is usually much slower than the motion shown in accelerated educational demonstrations. Its ideal rate is approximately 15.04 degrees per hour multiplied by the sine of the local latitude. At 52.2° north, that works out to about 11.9 degrees per hour, which means a noticeable change in floor alignment takes many minutes. A complete circuit there takes roughly thirty hours, while a polar pendulum completes its relative rotation in one sidereal day. The live panel separates this natural rate from the artificially boosted teaching rate. Press the real-Earth preset to remove the exaggeration, then compare the slow change with the faster demonstration setting.

07How should I use the controls to run a useful experiment?

Begin with the demo preset, an initial amplitude around ten degrees, and a camera looking down toward the floor dial. Start the simulation and note the apparent swing direction relative to the fixed compass marks. Pause to examine the projected trail, then change only latitude and repeat. Try the equator and a pole as limiting cases. For a second experiment, keep latitude fixed but increase cable length: the period readout grows, while the ideal natural precession rate stays controlled by latitude. Finally, turn damping up to see energy decrease. Reset returns the bob to its configured initial release. Change one parameter at a time whenever you want to identify a clear cause-and-effect relationship.

08Why does the motion gradually fade when damping is enabled?

A real pendulum loses energy to air drag, tiny vibrations, deformation, and friction at the support. These dissipative effects eventually stop the motion unless a museum mechanism gently maintains the oscillation. This simulation uses a simplified linear damping acceleration that is opposite to horizontal velocity. Larger damping values remove kinetic and potential energy more rapidly, making the swing envelope shrink. The natural Coriolis term itself does not dissipate energy because its acceleration is perpendicular to the horizontal velocity. If you set damping to zero, the model should oscillate for much longer, aside from small integration errors. The demonstration intentionally omits detailed aerodynamic drag laws and active driving mechanisms.

09What does this simulation leave out compared with a real Foucault pendulum?

The displayed motion uses a linear small-angle approximation with two horizontal coordinates and an idealised cable. Real pendulums follow a three-dimensional spherical constraint and may display elliptical motion, suspension imperfections, nonlinear amplitude corrections, and effects from air currents or subtle asymmetries. The rendered support, dome, and metallic surfaces are illustrative geometry rather than a structural-engineering calculation. The energy display is also approximate, because it uses horizontal velocity components and an inferred vertical rise. Large demonstration multipliers artificially increase the Coriolis force and should not be interpreted as real Earth conditions. These omissions are explained so visitors can distinguish a useful physical teaching model from an experimentally calibrated digital twin.

10Why can the experiment reveal Earth's motion without watching the sky?

The key is that an oscillator with very little unwanted sideways force provides a reference orientation that does not simply follow the rotation of the floor. An observer does not need to see the stars: they compare the plane of the pendulum’s motion with marks fixed to their own building over a period of time. The latitude-dependent precession agrees with what a rotating terrestrial coordinate system predicts. A well-designed real installation must account for disturbances that might mimic a slow drift, which is why long cables, heavy bobs, careful release procedures, and low-friction pivots matter. The exercise illustrates an important theme in physics: measurements inside a rotating frame can reveal the frame’s motion.

⚙ Under the hood

Explore a detailed 3D Foucault pendulum. Change latitude, cable length, damping and Earth rotation to understand physics through interactive experiments.

foucaultpendulumsimulation3D simulationWebGL

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)