Nanofiller Shear Lag: Stress Transfer Length and Halpin-Tsai Stiffness of Polymer Nanocomposites
Pull a polymer specimen and look inside at one nanofibre. Cox shear lag gives the stress that builds up from the fibre ends, the interface shear that carries it, the transfer length and the length efficiency. Change fibre length, diameter, volume fraction, moduli, orientation and interface strength and compare the composite modulus from Cox-Krenchel with Halpin-Tsai and the rule of mixtures. A Blender-built specimen and fibre cell, with numerical checks built in.
Reinforcing a polymer with nanoscale fillers works only because stress can cross the polymer–filler interface. This simulator renders the Cox/Kelly–Tyson shear-lag model in real 3D: a hero nanofiller sits inside a strained polymer matrix, colored along its length by the axial stress it actually carries, while the interfacial shear stress that put it there peaks visibly at its two tips. Sliders for aspect ratio, filler volume fraction, applied strain, filler stiffness (carbon nanotube, graphene, nanoclay or glass fiber for scale) and alignment update the stress profile and a set of live readouts — composite modulus, shear-lag length efficiency, peak interfacial shear stress and the critical-length ratio — showing exactly why aspect ratio is the property nanofillers exploit that microscale fibers cannot.
Pull a polymer specimen and look inside at one nanofibre. Cox shear lag gives the stress that builds up from the fibre ends, the interface shear that carries it, the transfer length and the length efficiency. Change fibre length, diameter, volume fraction, moduli, orientation and interface strength and compare the composite modulus from Cox-Krenchel with Halpin-Tsai and the rule of mixtures. A Blender-built specimen and fibre cell, with numerical checks built in.
3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install