Home▸Fluid Dynamics & Aerodynamics▸Gravity Dam Stability: 2D Cross-Section Lab

Gravity Dam Stability: 2D Cross-Section Lab

Cross-section of the dam with reservoir, tailwater, force arrows and the uplift diagram, plus gauges for the sliding and overturning safety factors and the base stress profile. Same shared model and numerical checks as the 3D lab; educational, not for design.

Fluid Dynamics & Aerodynamics2DModerate60 FPS📱 Mobile-adapted🟠 Blender⇄ 3D version
Gravity Dam Stability: 2D Cross-Section Lab ↗ Open standalone

Cut a concrete gravity dam in half and watch how the loads add up per metre of dam length: water thrust that grows with the square of depth, the weight of the concrete, uplift under the base, an optional earthquake load and tailwater. Raise the reservoir (or let a flood rise) and see the sliding and overturning safety factors, the position of the resultant against the middle third, and the base stress. Blender-built concrete, rock valley, intake tower and crest rail, with numerical integration checks built in. An abstract educational model, not a design or assessment method.

⚙ Under the hood

Cross-section of the dam with reservoir, tailwater, force arrows and the uplift diagram, plus gauges for the sliding and overturning safety factors and the base stress profile. Same shared model and numerical checks as the 3D lab; educational, not for design.

Gravity DamHydrostatic PressureUpliftOverturningSlidingHydraulic Engineering

2D · HTML5 Canvas 2D · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)