Home▸Engineering & Materials▸Hydrocyclone Cut Size and Cyclone-Sand Dam: 2D Cross-Section

Hydrocyclone Cut Size and Cyclone-Sand Dam: 2D Cross-Section

Cross-section of the growing cyclone-sand dam with pond, cyclone on the crest, sand and fines streams and the downstream slope angle, plus the partition curve against the feed grain sizes. Same shared model and numerical checks as the 3D lab; educational, not for design.

Engineering & Materials2DModerate60 FPS📱 Mobile-adapted🟠 Blender⇄ 3D version
Hydrocyclone Cut Size and Cyclone-Sand Dam: 2D Cross-Section ↗ Open standalone

A battery of hydrocyclones on a dam crest splits mine tailings into coarse sand for the dam and fine slurry for the pond. Change the cyclone diameter, feed flow, feed grain size and water split and watch the Stokes cut size d50, the partition curve and the share of solids sent to the dam move, then see how fines in the sand raise pore pressure and lower the slope safety factor as the dam grows over 20 years. Blender-built cyclones, sand and rock, with grain-size integration, force-balance bisection, mass-balance, cross-section and slice-force checks built in. An abstract educational model, not a design or assessment method for any real tailings facility.

⚙ Under the hood

Cross-section of the growing cyclone-sand dam with pond, cyclone on the crest, sand and fines streams and the downstream slope angle, plus the partition curve against the feed grain sizes. Same shared model and numerical checks as the 3D lab; educational, not for design.

HydrocycloneTailings DamMineral ProcessingStokes LawSlope StabilityPartition Curve

2D · HTML5 Canvas 2D · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)