Home▸Engineering & Materials▸Flood Gate Level Control: 2D Side View

Flood Gate Level Control: 2D Side View

Side view of the reservoir, lift gate, banks and houses with the setpoint and danger lines, plus the level, setpoint, danger line and gate opening plotted against time. Same shared model and numerical checks as the 3D lab; educational, not for design.

Engineering & Materials2DModerate60 FPS📱 Mobile-adapted🟠 Blender⇄ 3D version
Flood Gate Level Control: 2D Side View ↗ Open standalone

A river flood rises behind a vertical-lift gate. Choose the flood size and timing, the gate width, the reservoir area and the controller (PID, proportional only, fixed gate or fully open) and watch the level, the outflow and the gate opening over 36 hours. The gate law integrates the jet velocity over the opening, so orifice and weir flow are one formula; the reservoir obeys a mass balance. See the peak level, the time above the danger line, the flood attenuation and what too much gain does. Blender-built gate piers, lift-gate leaf and village houses, with jet-velocity integration, Torricelli-limit, hydrograph-volume, mass-balance and convergence checks built in. An abstract educational model of an inanimate hydraulic structure, not a design method.

⚙ Under the hood

Side view of the reservoir, lift gate, banks and houses with the setpoint and danger lines, plus the level, setpoint, danger line and gate opening plotted against time. Same shared model and numerical checks as the 3D lab; educational, not for design.

Flood ControlGate HydraulicsPID ControlOrifice FlowWeir FlowHydraulic Engineering

2D · HTML5 Canvas 2D · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)