Home▸Energy & Thermodynamics▸Geothermal District Heating: Doublet Cold Front, Heat Exchanger and Network Heat Loss

Geothermal District Heating: Doublet Cold Front, Heat Exchanger and Network Heat Loss

Follow the heat from a geothermal doublet to the homes it warms. Two wells in a sandstone aquifer circulate hot water; injected cold water spreads along the streamlines and its front reaches the producer after the thermal breakthrough time, so the produced temperature falls over the years. Darcy flow sets the pressure drop and pump power, a counterflow plate heat exchanger (epsilon-NTU) hands the heat to the district-heating water, and buried pre-insulated pipes lose a little on the way. Set flow rate, well spacing, depth, aquifer thickness and permeability, exchanger size, network flow, length and pipe diameter. Blender site, with independent numerical checks built in.

Energy & Thermodynamics3DModerate60 FPS📱 Mobile-adapted🟠 Blender⇄ 2D version
Geothermal District Heating: Doublet Cold Front, Heat Exchanger and Network Heat Loss ↗ Open standalone

Follow the heat from a geothermal doublet to the homes it warms. Two wells in a sandstone aquifer circulate hot water; injected cold water spreads along the streamlines and its front reaches the producer after the thermal breakthrough time, so the produced temperature falls over the years. Darcy flow sets the pressure drop and pump power, a counterflow plate heat exchanger (epsilon-NTU) hands the heat to the district-heating water, and buried pre-insulated pipes lose a little on the way. Set flow rate, well spacing, depth, aquifer thickness and permeability, exchanger size, network flow, length and pipe diameter. Blender site, with independent numerical checks built in.

⚙ Under the hood

Follow the heat from a geothermal doublet to the homes it warms. Two wells in a sandstone aquifer circulate hot water; injected cold water spreads along the streamlines and its front reaches the producer after the thermal breakthrough time, so the produced temperature falls over the years. Darcy flow sets the pressure drop and pump power, a counterflow plate heat exchanger (epsilon-NTU) hands the heat to the district-heating water, and buried pre-insulated pipes lose a little on the way. Set flow rate, well spacing, depth, aquifer thickness and permeability, exchanger size, network flow, length and pipe diameter. Blender site, with independent numerical checks built in.

Geothermal EnergyDistrict HeatingDarcy FlowThermal BreakthroughPlate Heat ExchangerDoublet

3D · Three.js / WebGL renderer · 60 FPS target · runs fully client-side, no install

What did you find?

Add reproduction steps (optional)