3D Desert Sandstorm: Saltation, Dust Lift-off and Visibility

A storm front crosses an oasis: sand starts to hop above a threshold wind, dust is lifted by turbulence and the visibility collapses.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A desert oasis with a 10 m weather mast. When the storm front arrives the wind rises; once the friction velocity passes the threshold, sand grains start to hop (saltation), their impacts kick up fine dust, turbulence lifts the dust, and the dust cuts the visibility. The page follows that chain of cause and effect with standard aeolian-science formulas, and the grains you see are integrated with real drag.

Equations

  • Wind profile near the ground: u(z) = (u*/κ) ln(z/z0) with κ = 0.4 and u* = κ U10 / ln(10/z0).
  • Threshold for moving sand (Bagnold): u*t = A √((ρp − ρa) g d / ρa), A = 0.1, multiplied by the Fecan moisture factor √(1 + 1.21 (w − w')0.68) for wet soil (w' set by 5 % clay).
  • Saltation flux per metre of width: q = 2.61 (ρa/g) u*3 (1 − u*t/u*)(1 + u*t/u*)2 √(d / 250 µm).
  • Dust emission by sandblasting: F = α q, α of order 10−5 per metre. Dust falls at the Stokes speed ws = (ρp − ρa) g d2 / (18 μ).
  • Steady suspension (Rouse): turbulent diffusion K = κ u* z against settling gives C(z) = Cref (z/zref)−b, b = ws/(κ u*), Cref = F / ws.
  • Visibility: extinction σ = σbg + 3 Q C / (4 ρp r) with Q = 2, and Koschmieder's V = 3.912 / σ (2 % contrast threshold). The fog in the 3D view uses exactly this V.
  • The dust level follows the equilibrium with a response time of fetch / wind speed, and decays by settling when the wind drops.

Checks run in the page

  • Stokes settling speed against a numerical integration of nonlinear drag.
  • The log wind law against a numerical integral of the shear.
  • The Rouse exponent against a finite-volume solution of the diffusion-settling balance.
  • Koschmieder visibility against marching a beam through haze, and the textbook visibilities for 1 mg/m3 and 1 g/m3 of 5 µm dust.

Honest simplifications

  • Neutral atmosphere, flat terrain for the physics; the dunes are only scenery. The dust wall is drawn at a reduced scale (a real haboob wall is a kilometre high) and its arrival time is fixed at 90 s of simulation time.
  • The dust emission efficiency α, the saltation prefactor and the mass-extinction assumptions (Q = 2, one particle size) are representative values; measured dust emission varies by orders of magnitude between soils.
  • Saltating grains are a visual sample whose number follows q; their rebound and splash rules are simplified, and their count is not a measurement.
  • Sun dimming uses the column optical depth of the equilibrium profile up to a 300 m mixing height.

What to try

  • Press the storm button and watch the wind, then the grains, then the dust and visibility respond in that order.
  • Use Wet soil after rain: the threshold rises, the grains stay put and no storm forms at the same wind speed.
  • Compare Coarse sand with Fine silt: coarse sand needs more wind but settles fast, fine silt travels much farther.
  • Choose the Ground level camera to follow saltating grains at about 10 to 50 cm height.
Loading model...
Loading Blender model...
Friction velocity against the sand threshold
Dust concentration against height (Rouse profile)
Equilibrium visibility against wind speed
Made with 🟠 Blender · Three.js