Presets
Playback
Apparatus
Model checks
The science
What is modelled
The jumper is one point mass of 70 kg. On the in-run, gravity along the track is opposed by snow friction and air drag; on the curved transition the track also pushes harder on the skis. After the take-off table the jumper flies under gravity, quadratic drag and a lift force perpendicular to the air flow, until the flight path meets a simplified landing-hill profile.
Equations
- In-run
dv/dt = g sinφ − μ (g cosφ + v2/R) − ½ρ(CdA)in vr|vr| / m, R = 80 m on the transition. - Flight
m dv/dt = m g − ½ρCdA|vr|vr + ½ρClA|vr| R90vr, withCd = 0.30 + 1.05 sin2α,Cl = 1.2 sin 2α. - Without losses the edge speed is
v = √(2 g h); with drag only the terminal speed isvt = √(2 m g / (ρ Cd A)).
Checks run in the page
- Drag-free flight lands where the parabola says.
- A frictionless drag-free in-run gives sqrt(2 g h).
- Falling with drag reaches the terminal speed and follows tanh.
- The bisected landing agrees with a much finer integration.
Honest simplifications
The coefficients are illustrative, not wind-tunnel data. The body angle is held constant, there is no rotation, no pitching moment and no snow resistance on landing. The hill is a simplified profile, not a homologated one, and the distance is the straight chord from the edge.
What to try
- Press Ice-fast track and compare the edge speed with sqrt(2 g h).
- Sweep the body-ski angle: lift grows, then drag takes over.
- Press Tailwind 2.5 m/s and see how much distance a few metres per second cost.