Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What is modelled
An orb web hangs between two plants on a clear night. The air cools toward its dew point; once it is saturated, water vapour condenses on the silk. Each tiny drop is cooled below the air by radiating heat to the cold sky, so it grows; the water film on the thread then breaks into regularly spaced beads (the Plateau-Rayleigh instability) and neighbouring beads coalesce into bigger ones. In the morning, warming and sunlight reverse the process.
Equations
- Air and humidity: the temperature follows
Ta(t) = T0 + (trend) twith the vapour content fixed until saturation (Magnus formulaes = 6.112 exp(17.62 T/(243.12 + T))hPa); after that RH = 100 % and the dew point follows the air. - Radiative cooling:
Q = ε σ Ta4 (1 − εsky) − as Swith the clear-sky emissivityεsky = 0.787 + 0.764 ln(Td/273.15), increased by clouds as(1 + 0.22 c2.75). - Drop energy balance: conduction from the air
ka ΔT / rplus latent heatL ρw dr/dtequals the radiative loss, soΔT = (Q r − L ρw r dr/dt) / ka. - Diffusion-limited growth with the Kelvin effect:
r dr/dt = A [ (RH − 1) + b r − κ/r ] / (1 + Φ),A = D ρvs/ρw,b = β Q / ka,β = L / (Rv T2),κ = 2γ/(ρw Rv T). Drops smaller thanrc ≈ √(κ/b)evaporate, bigger ones grow roughly linearly in time. - Beads on silk: a film of outer radius R on a thread of radius a is unstable and breaks into beads every
λ = 9.02 R(inviscid Rayleigh, maximisingkR I1(kR)/I0(kR) (1 − (kR)2)). Film volume per lengthV' = π(R2 − a2), bead volumeV' λ, so a bead hasr ≈ 1.9 Rand condensation feedsdV'/dt = 4π r (r dr/dt) / λ.
Checks run in the page
- Dew point from Magnus against an independent Antoine-equation bisection.
- Drop growth law integrated numerically against its closed form.
- Plateau-Rayleigh fastest wavelength found numerically (about 9.02 R).
- Kelvin supersaturation of a 1 µm drop and the critical radius against its closed form.
- Water budget on the thread (RK4 against a fine Euler integration) and the clear-sky radiative loss range.
Honest simplifications
- Every thread is assumed to carry wetted nuclei of about 3 µm (hygroscopic dust, spindle knots of the silk); the model starts there and does not simulate nucleation.
- The drops are treated as isolated spheres in still air: no wind, no fog droplets landing on the web, and no vapour competition between neighbouring drops. Silk wetting and the real contact angle are not modelled; beads are drawn as spheres.
- The Plateau-Rayleigh wavelength is the inviscid value; viscosity and the silk's hygroscopic knots change it in real webs. Coalescence is drawn as pairs merging when the spacing doubles.
- The web is drawn with a thread about 200 times thicker than a real 2.5 µm silk strand and the beads are magnified (slider) so they are visible; the true-scale drawing in the third graph shows the real proportions. At most a few thousand beads are drawn; the readout gives the true count.
- The sky emissivity is an empirical clear-sky formula, the sun heats the drop through an assumed 15 % absorptivity, and latent heat is included only through the quasi-steady drop energy balance.
What to try
- Run the default night: nothing happens until the air reaches the dew point, then the bead radius grows about linearly with time.
- Choose Cloudy night: less radiative cooling means a smaller drop-to-air difference and slower growth.
- Choose Dry air: no dew, however long the night.
- Press Sun comes up to see the beads shrink as the air warms.
- Use the Thread macro camera and watch beads merge as the spacing follows 9.02 R.
Loading model...
Loading Blender model...