3D Audio Equalizer

A Blender-built studio rack with ten draggable faders: real peaking biquad filters, LED spectrum display, phase, impulse response and live Web Audio.

Switch to 2D

Presets

Playback

Signal, bands and preamp

Camera

Layers

Quality

Model check

The science

What is modelled

A 10-band graphic equalizer, as in a studio rack: ten peaking (bell) filters centred on octave-spaced frequencies from 31 Hz to 16 kHz, cascaded, plus a preamp. Each fader sets the boost or cut (-12 to +12 dB) of one band; all bands share the filter quality factor Q. The filters are the standard second-order digital biquads from the Audio EQ Cookbook (Robert Bristow-Johnson).

Equations

  • Peaking biquad: A = 10^(g/40), w0 = 2 pi f0 / fs, alpha = sin(w0) / (2 Q); b0 = 1 + alpha A, b1 = a1 = -2 cos w0, b2 = 1 - alpha A, a0 = 1 + alpha / A, a2 = 1 - alpha / A.
  • Transfer function: H(z) = (b0 + b1 z^-1 + b2 z^-2) / (a0 + a1 z^-1 + a2 z^-2), evaluated on the unit circle z = e^(j w); magnitude in dB is 20 log10 |H|. At the centre frequency the gain equals exactly g dB.
  • Cascade: the total response is the product of the band responses, i.e. their dB values add (with the preamp); the phase is the sum of the band phases (minimum-phase filters, so a boost brings a phase lead then lag).
  • Time domain: the impulse response is obtained by running the difference equation y[n] = b0 x[n] + b1 x[n-1] + b2 x[n-2] - a1 y[n-1] - a2 y[n-2] (transposed direct form II) at 48 kHz; narrower bands (higher Q) and larger gains ring longer.
  • Display bands: 40 log-spaced bands from 20 Hz to 20 kHz. Pink noise has equal energy per octave, so it looks flat on a log display; white noise has equal energy per Hz, so it rises 3 dB per octave.

Checks run in the page

  • A single +9 dB band gives exactly +9 dB at its centre frequency and almost nothing five octaves away.
  • The DFT of the impulse response computed from the difference equation matches the analytic H(z) within 0.02 dB at ten frequencies.
  • The browser's own BiquadFilterNode.getFrequencyResponse for the same ten filters agrees with this page's cascade within 0.05 dB at 48 frequencies.

Honest simplifications

Without sound, the LED display shows a model of the chosen test signal (pink and white noise, a sweep, a chord or a beat) multiplied by the analytic equalizer response; with Sound on it shows the real FFT of the audio that passed through ten Web Audio filters. The band levels are relative and not calibrated to a particular meter standard. Real graphic equalizers use fixed or constant-Q designs that differ in how neighbouring bands interact; this is a parametric-style bell for every band. Speaker cone motion is a visual cue driven by the displayed low- and high-band levels, not a loudspeaker model. The rack, faders, knob and speakers were modelled and baked in Blender; none of it is a particular product.

What to try

  • Load "Notch at 1 kHz" and play the sweep: the sweep dips as it passes 1 kHz; compare the magnitude and impulse-response graphs.
  • Raise Q from 0.5 to 4 and watch the ringing in graph 4 and the narrower bell in graph 1.
  • Use the Bypass lamp to A/B any preset by ear (with Sound on) and by eye.
  • Play pink and white noise through a flat EQ to see why one looks flat and the other tilts.
  • Drag faders directly in the 3D view; the sliders follow.
Loading model...
Loading Blender model...
Frequency response of the cascade (dB)
Spectrum display: output and input signal
Phase response (degrees)
Impulse response: the ringing of the filter bank
Made with 🟠 Blender · Three.js