Torsion Catapult: Arm Dynamics, Release Angle and Ballistics with Drag and Wind

A Blender-built torsion catapult swings its arm against the stop bar and throws a ball at a ring target: tune the skeins, the ball and the stop, and watch energy, drag and wind decide the landing.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A torsion catapult (an onager): a wooden arm is held in a bundle of twisted rope skeins. Winding the skeins stores elastic energy; when the arm is released it swings through a short arc, hits the stop bar, and the ball in the cup carries on into free flight. The Blender model has the frame, the skeins, the winch, the arm with its cup, the movable stop bar and a ring target; the physics is a one-degree-of-freedom arm plus a three-dimensional ballistic flight with air drag and wind.

Equations

  • Arm: I θ'' = k (θ0 − θ) + M g (L/2) cosφ + m g R cos(φ + β), with I = M L²/3 + m R², φ = φr − θ. The skein torque is linear in the twist (a torsion spring of stiffness k with pre-twist θ0); the other two terms are the weights of the arm (mass M = 60 kg, length L = 3 m) and the ball. It is integrated with a fourth-order Runge-Kutta step of 40 microseconds.
  • Release: the arm stops at the bar, and the ball leaves with speed v = R ω perpendicular to the radius vector. The stop bar angle therefore sets the release elevation directly.
  • Flight: m dv/dt = −m g ŷ − ½ ρ Cd A |v − w| (v − w) with ρ = 1.2 kg/m³, Cd = 0.47 (smooth sphere), A = π r² and a constant wind w. The ball radius follows from its mass and the chosen material density.

Simplifications (honest list)

  • The skein torque is treated as exactly linear; real rope bundles stiffen with twist and lose energy to internal friction. The stiffness and pre-twist are free parameters, not measured values of a particular machine.
  • The ball is assumed to stay in the cup until the arm stops, and the cup and arm are rigid. The collision with the stop bar is not modelled: the arm just stops, and its remaining energy is lost.
  • Cd is constant (no drag crisis, no spin or Magnus force), air density is constant, wind is uniform, and the ball sticks where it lands (no bounce or roll).
  • Educational model of a historical machine; ball and target are harmless.

Independent checks (run on page load)

Energy balance of the swing, vacuum flight against the closed-form parabola, terminal speed against m g = ½ ρ Cd A v², small-oscillation period of the arm against 2π√(I/keff), and the Blender arm geometry against the constants used by the physics.

Loading model...
Loading Blender model...
Range against release elevation (this machine)
Energy budget during the arm swing
Trajectory with drag and wind against the vacuum parabola
Made with 🟠 Blender · Three.js