Deep-Sea Jellyfish: Pulsed Jet Propulsion, Thrust, Drag and Swimming Speed

Watch a school of medusae swim by pulsing: bell volume, orifice jet thrust, added mass, drag and the momentum-balance speed.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

Five moon-jelly style medusae pulsing in a dark tank. Each bell contracts, squeezing a fraction of its volume out through the rim opening as a jet, then relaxes and refills. You set the bell size, the pulse rate, how much water is expelled, how narrow the opening is and the drag; the tracked jelly (camera-followed) reports forces, flow and speed live. The bioluminescent flash on each pulse is a stylised visual cue, not a model of the photoprotein chemistry.

Equations

  • Bell volume over one cycle (period T = 1/f, power stroke fraction c): V(φ) = V0 − ΔV (1 − cos(π φ/c))/2 while contracting, then back to V0 with the mirror half-cosine while refilling. V0 = π ƒ D3/12 for a half oblate ellipsoid of fineness ƒ = 0.55.
  • Outflow through the opening: Q = −dV/dt = ΔV π /(2 c T) sin(π φ/c); the jet carries momentum flux Thrust = ρ Q2/Ao with Ao = π(do/2)2. During refilling the water is sucked in from all sides, which gives no net thrust in this model.
  • Impulse of one stroke: I = ρ π2 ΔV2 / (8 c T Ao): a smaller opening makes a faster, more forceful jet.
  • Motion: (m + ma) dv/dt = Thrust h − ½ ρ Cd A |v| v − Wnet j, added mass ma = Ca ρ Venv (Ca = 0.8) and weight Wnet = Δρ g Venv, where Δρ is the small density excess of the jelly tissue.
  • Periodic steady swimming: averaged over a cycle the thrust must equal the drag, I f = k ⟨U2⟩ with k = ½ ρ Cd A, so Urms = √(I f / k). Energy: ⟨T U⟩ = k ⟨U3⟩.
  • Without pulses a jelly sinks at v = √(2 W / ρ Cd A).

Checks run in the page

  • Stroke impulse from numerical integration against the closed form, and the ejected volume equals ΔV.
  • Periodic momentum balance: simulated rms speed against √(I f / k).
  • Energy balance: thrust power equals drag dissipation, with efficiency below 100 %.
  • Bell volume closes after each cycle.
  • Terminal sinking speed when pulsing stops.

Honest simplifications

  • Real medusae form vortex rings and gain extra thrust from passive energy recovery and from suction at the bell margin; this model keeps only the steady-jet momentum flux (a lower estimate of pulse thrust) and an idealised half-sine flow.
  • The drag coefficient is a single constant for the whole body, although it varies with Reynolds number and with the bell shape during the cycle.
  • Added mass is a fixed fraction of the enclosed volume and does not change as the bell contracts.
  • Heading changes (the slow turning and the wall steering) are scripted for readability and are not physics. The tentacles trail behind as a damped chain, a visual effect that does not feed back on the swimming speed.
  • Default parameters are typical of a moon jelly of about 12 cm but are illustrative, not fitted to a specific animal.

What to try

  • Narrow the opening to 0.35: the jet is stronger and the jelly swims faster, as the impulse formula predicts.
  • Double the pulse frequency: speed rises with the square root of f.
  • Pick "Stop pulsing: pure sinking" and watch the tracked jelly sink at its terminal speed.
  • Compare the speed graph with the dashed prediction line.
Loading model...
Loading Blender model...
Swimming speed of the tracked jelly
Bell volume and outflow
Jet thrust and drag
Made with 🟠 Blender · Three.js