Sonic Boom (3D)

A jet flies faster than its own sound: the wavefronts pile up into a Mach cone, and every house it sweeps over hears the boom.

Switch to 2D

Presets

Playback

Flight

Camera

Layers

Quality

Model check

The science

What you are looking at

Every point of the aircraft's path is a source of sound. Each pulse spreads as a sphere at the speed of sound a. Below Mach 1 the aircraft stays inside its own waves, so you hear it coming. Above Mach 1 it outruns them: the spheres pile up along a cone, the Mach cone, and everyone the cone sweeps over hears a sudden double bang, the sonic boom. The boom is not a one-off event at the moment of passing Mach 1: it follows the aircraft for as long as it flies supersonically.

Equations

  • Mach number M = v / a, with a = sqrt(gamma R T) from the International Standard Atmosphere at the flight altitude.
  • Cone half-angle: sin(mu) = a t / (v t) = 1 / M.
  • A listener at lateral offset z under flight altitude H is on the cone when (x_aircraft - x_listener) tan(mu) = r, with slant range r = sqrt(H^2 + z^2). The boom reaches the ground behind the aircraft by r / tan(mu), i.e. delay = r / (v tan mu): the footprint on the ground is a hyperbola.
  • Peak overpressure (far-field, N-wave) scales as dp ~ sqrt(p_v p_g) (M^2 - 1)^(1/8) r^(-3/4) l^(3/4) (Whitham; the engineering form is due to Carlson). Duration grows with length and with range as r^(1/4).
  • Peak level in decibels: 20 log10(dp / 20 micropascal).

Honest simplifications

  • Straight, level flight in a uniform atmosphere at the speed of sound of the flight altitude. Real sound rays bend in the temperature and wind gradient: there is a cut-off Mach number below which no boom reaches the ground, and the boom carpet is finite. Neither is modelled.
  • The overpressure constant (aircraft shape, lift distribution, ground reflection factor) is calibrated once on a published figure for a large supersonic airliner (about 96 Pa at Mach 2, 15.8 km, 62 m). Other aircraft shapes differ by tens of percent; it is an estimate, not a design tool.
  • The N-wave is drawn as an ideal triangle with instantaneous shocks. Real shocks have a rise time of a few milliseconds and turbulence rounds them.
  • The aircraft is drawn 8 times its true size and the houses 4 times, so that they can be seen from kilometres away; distances, speeds and angles are true.
  • Engine noise, acceleration booms (focussing) and manoeuvres are not included.

Things to try

  • Raise Mach from 1.05 to 3 and watch the cone close from almost flat to a needle.
  • Fly low (300 m): the boom is much stronger at the ground but it reaches it very soon after the overflight.
  • Double the length (airliner-size) and read the larger overpressure and longer N-wave.
  • Compare the five houses: farther from the track means a later and weaker boom.
Loading model...
Loading Blender model...
Pressure at the selected house: the ideal N-wave (two shocks)
Boom delay behind the aircraft versus distance from the track (hyperbola)
Ground overpressure versus Mach number (solid: this altitude, dashed: twice as high)
Made with 🟠 Blender · Three.js