Presets
Playback
Sources, field and chamber
Camera
Layers
Quality
Model check
The science
What is modelled
A diffusion cloud chamber: alcohol evaporates from a warm felt at the top, drifts down through a steep temperature gradient and becomes supersaturated near the cold plate (dry ice, -78.5 C). A charged particle ionises the gas it crosses; vapour condenses on the ions and leaves a thin line of droplets that you see for a second or two. The droplets then settle at their Stokes speed and the track fades. Tracks exist only where the supersaturation is high enough to grow droplets on ions but not so high that fog forms by itself, so they show up only in a layer.
Equations
- Vapour pressure:
p_sat(T) = p0 exp[-(Lv/R)(1/T - 1/Tb)]with isopropanol Lv = 43.5 kJ/mol and Tb = 355.4 K. - Supersaturation
S(y) = p_v(y)/p_sat(T(y)), with the vapour falling linearly from the top value to the plate value and capped at the fog-onset value S_hom. - Ion nucleation (Kelvin): droplets grow on an ion of radius r_ion when
S ≥ exp[2 sigma Vm /(R T r_ion)]; critical radiusr* = 2 sigma Vm /(R T ln S). - Alpha range:
R = 0.31 E^1.5 / rho_relcm, soE(R_rem) = (rho_rel R_rem/0.31)^(2/3)and the loss-dE/ds = (2/3) c R_rem^(-1/3)rises towards the end of the track (Bragg peak). - Magnetic bend:
r = p/(|z| e B), i.e.r[m] = p[MeV/c]/(299.79 |z| B[T]); the velocity is rotated about B byds/rper step. - Multiple scattering of electrons (Highland):
theta0 = 13.6 MeV/(beta p c) sqrt(x/X0) [1 + 0.038 ln(x/X0)], X0(air) about 304 m; this is why beta tracks wiggle. - Stokes settling:
v = 2 rho_l g r^2/(9 mu).
Checks run in the page
- The Clausius-Clapeyron vapour pressure matches the Antoine fit within 12 % at 0 and 20 C and equals 101.325 kPa at the boiling point.
- An electron traced step by step in a magnetic field has a track radius equal to p/(eB) within 1 %.
- An alpha stepped to rest, and a Simpson integral of the stopping power, both give the Bragg-Kleeman range within 1 %.
- The random decay clock reproduces the set rate and Poisson statistics.
Honest simplifications
The vapour profile is a one-dimensional steady model with a hard fog cap; a real chamber has convection, a thinner layer and turbulent fog. The gas is treated as air at the set density (alcohol vapour changes the stopping power slightly). Muons have a fixed 4 GeV/c momentum and the sea-level flux of about 1 per cm2 per minute through a horizontal plane; beta energies follow a simple allowed-spectrum shape. Each particle is drawn only where the layer is sensitive; track brightness is not a physical droplet count. The bench, glass, felt, dry ice, magnet and lamp were built in Blender and baked; the tracks, vapour and everything dynamic are real time.
What to try
- Raise the plate temperature to -35 C: the sensitive layer shrinks and then vanishes (graph 1).
- Switch on the strong magnet and watch betas curl into tight arcs while muons stay almost straight (sagitta readout).
- Choose the 8.8 MeV alpha: the track is about 8.5 cm long and thick, and the Bragg curve moves out.
- Increase gas density to 1.5: every range shortens by one third.
- Use the Top-down camera to see the radial pattern of the source.