3D Nuclear Chain Reaction: Pool Reactor Kinetics

Delayed neutrons, control rods and temperature feedback in a Blender-built research reactor pool, solved with six-group point kinetics.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A small pool-type research reactor: 33 fuel rods and four control rods stand on a grid plate in a tiled water pool under a bridge with drive motors. The page solves the neutron chain reaction in real time with six delayed-neutron groups, an S-shaped control rod worth curve and two temperature feedbacks (fuel and coolant), so you can see why a reactor is controllable: most neutrons of a chain reaction come from the fission itself within microseconds, but a small delayed fraction arrives seconds later and sets the pace. The hall, pool, fuel and rods are Blender-built models; the blue glow and the neutron cloud scale with the simulated power.

Equations

  • Point kinetics: dn/dt = [(ρ − β)/Λ] n + Σ λi Ci + S, dCi/dt = (βi/Λ) n − λi Ci, with Λ the prompt neutron generation time, β = Σ βi (0.65 % for U-235) and k = 1/(1 − ρ).
  • Reactivity: ρ = ρrods(x) + αD (Tfuel − T0) + αM (Tcool − T0) + ρstep; the rod worth follows an S-shaped integral curve (1 − cos πx)/2 of the insertion x.
  • Stable period: the roots of the inhour equation ρ = Λ ω + Σ βi ω / (ω + λi). At ρ ≥ β the reactor is prompt critical and the power grows on the microsecond-to-millisecond scale of Λ alone.
  • Heat: Cf dTf/dt = P − h (Tf − Tc), Cc dTc/dt = h (Tf − Tc) − hc (Tc − Tpool), with P = n P0. Negative coefficients make the power settle by itself.

Checks run in the page

  • A positive reactivity step: the simulated stable period against the largest root of the inhour equation.
  • A shutdown step: the slow decay against the matching negative inhour root.
  • Feedback equilibrium: the steady power with rods held +60 pcm out of critical against the analytic P = −ρext / ((αD + αM)/hc + αD/h) (heat capacities are scaled down only to reach equilibrium sooner).

Honest simplifications

This is zero-dimensional point kinetics: no spatial flux shape, no xenon, no burnup, a single lumped fuel and coolant temperature, and no decay heat after shutdown. Parameters are illustrative values in the range of small research reactors, not a model of any real plant. Automatic trips (120 % power, 650 C fuel, 3 s period) are a simplified safety system; with them switched off the model shows how a large reactivity step behaves, but it has no fuel damage model. It is a physics lesson on the neutron balance, not an operating guide.

What to try

  • Lower the rod insertion by one percent: the power rises on a period of tens of seconds, then feedback stops it.
  • Press Insert reactivity step with +200 pcm, then with a value above beta (650 pcm for U-235) and trips off: the second case jumps almost at once.
  • Choose Weak delayed neutrons (Pu-239-like): the same step is much harder to control.
  • Press SCRAM and watch the prompt drop followed by the slow decay on the graph.
Loading model...
Loading Blender model...
Power relative to rated (log scale)
Reactivity: rods, feedback and total
Fuel and coolant temperature
Made with 🟠 Blender · Three.js