3D Fusion Reactor

A tokamak hall with a live D-T plasma: power balance, Q gain, Lawson triple product, safety factor and density limits.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A tokamak: a donut-shaped vacuum vessel wrapped in D-shaped toroidal-field coils, with a central solenoid that drives the plasma current and poloidal coils that shape the plasma. A deuterium-tritium plasma is heated by external power; the 3.5 MeV helium nuclei (alphas) from fusion heat it further, while the 14.1 MeV neutrons escape to the walls. The page solves the plasma power balance in time and checks the stability limits that decide whether the plasma survives.

Equations

  • Fusion power: Pf = (n²/4) ⟨σv⟩(T) · 17.6 MeV · V with the Bosch-Hale (1992) parametrisation of the D-T reactivity; one fifth of the energy (3.5 MeV) is carried by the alpha and stays in the plasma.
  • Energy balance: dW/dt = Paux + Pα − W/τE − Pbrems, stored energy W = 3 n T V, bremsstrahlung Pbrems = 5.35×10−37 Zeff n² √T V (W, SI).
  • Confinement time from the empirical IPB98(y,2) scaling: τE = 0.0562 Ip0.93 B0.15 P−0.69 n190.41 M0.19 R1.97 ε0.58 κ0.78.
  • Gain and Lawson: Q = Pf / Paux; ignition needs n T τE ≥ 12 T² / (Eα ⟨σv⟩), about 3×1021 keV s/m³ near 14 keV (green curve).
  • Stability: kink safety factor q95 ≈ 5 a² B (1+κ²)/2 / (R Ip) · (1.17 − 0.65ε)/(1 − ε²)² must exceed 2; density below the Greenwald limit nG = Ip/(πa²); Troyon limit βN = β[%] a B / Ip < 3.

Checks run in the page

  • The D-T reactivity at 10 and 20 keV against the tabulated values, and the minimum of the ignition triple product (about 3e21 near 14 keV).
  • The published ITER design point (R = 6.2 m, 15 MA, 5.3 T, n = 1e20 m−3, 8.8 keV): fusion power about 500 MW and confinement time about 3.7 s.
  • Time integration of the energy balance from a cold start against the algebraic root of the power balance for the current settings.

Honest simplifications

Flat density and temperature profiles (real plasmas are peaked, which raises the fusion power), equal ion and electron temperatures, fixed 50:50 fuel, a fixed aspect ratio (a/R = 0.32) and no impurity or helium-ash transport. A disruption is modelled as a fast thermal quench, not as a full MHD event. Machine geometry in the 3D hall is schematic and not to scale of any real device. Educational energy-physics model only; no relation to any particular project is implied.

What to try

  • Start with the ITER-like preset: alpha heating comes close to the auxiliary power, giving a gain Q of about 10.
  • Reduce the auxiliary power to 20 MW and the plasma still burns on its own: self-heating takes over (alpha dominated preset).
  • Push the current up ('Too much current'): q95 drops below 2, the plasma wobbles and then disrupts. Raise the density past the Greenwald limit for a second kind of disruption.
  • Switch on the cutaway to look at the plasma cross-section inside the vessel.
Loading model...
Loading Blender model...
Heating and loss power vs temperature (crossing = steady state)
Temperature and fusion power history
Ignition triple product requirement
Made with 🟠 Blender · Three.js