3D Origami Crane

A paper crane from a square sheet: schematic folding stages, flapping wings on shoulder pivots, and the mass and wing loading that follow from the sheet size.

Switch to 2D

Presets

Playback

Folding

Sheet

Flapping

Camera

Layers

Quality

Model check

The science

What is modelled

A Blender-modelled paper crane (named parts: body, neck, head, tail and two wings on shoulder pivots) on a desk, shown beside the square sheet it is made from. The folding stage slider is a schematic: the parts rise from the flat sheet in sequence, it is not a crease-by-crease rigid-origami simulation. Once finished, the wings can flap about the shoulder axis, and the page computes the paper mass and the wing loading from the actual wing mesh.

Equations

  • Mass of a model folded from a square sheet of side a and paper weight g (grams per square metre): m = g a2. No paper is lost when folding, so this is exact for the whole crane.
  • Wing loading m g0 / S with wing planform area S = σ a2, where σ is taken from the mesh triangles. Because both m and S scale with a2, the wing loading depends only on the paper weight and the wing shape, not on the size of the crane.
  • Speed at which an ideal wing would balance the weight, v = √(2 m g0 / (ρ S CL)), with ρ = 1.2 kg/m3. It is a rough scale only: a folded crane is not an aerofoil.
  • Flapping about the shoulder axis: tip position r(θ) = Rz(±θ) rtip + rshoulder, tip speed |ṙ| = Ω θ0 ω cos ωt with Ω the tip distance from the shoulder axis.

Checks run in the page

  • The projected area of one wing summed from the Blender triangles is compared with the shoelace area of the outline used to build it.
  • Tip positions read from the scene graph for both wings at five angles are compared with the rotation formula.
  • The wing loading is computed at 5 cm and 30 cm sheet sizes from the scaled mesh and must agree, and equal the closed form.

Honest simplifications

  • The crane is a low-polygon paper-thin model with a simplified silhouette. Real cranes have layered flaps and inner pockets.
  • Folding is a staged morph of the parts; real folding goes through the preliminary base, bird base and petal folds.
  • The speed for lift equals weight is illustrative; folded paper stalls and tumbles rather than gliding.
  • Mass uses the nominal paper weight with no glue, ink or humidity.

What to try

  • Double the sheet side and watch the mass quadruple while the wing loading stays put.
  • Choose heavy card and see the loading rise in proportion to the paper weight.
  • Flap at high amplitude and compare the wingspan graph with the tip heights.
Loading model...
Loading Blender model...
Wing tip height over the last 4 s
Wingspan vs flap amplitude
Mass vs sheet side (wing loading is size independent)
Made with 🟠 Blender · Three.js