Presets
Playback
Vehicle and ground
Keys: W/S gas and brake, A/D steer, Space handbrake, R restart, C next camera. Touch: on-screen pad.
Experiments
The autopilot takes the wheel; any key hands control back.
Camera
Quality
Layers
Model checks
The science
Bicycle model with a friction circle
The truck is a planar rigid body with a front and a rear axle (the "bicycle model"). In the body frame the equations of motion are m(u̇ − v r) = ΣFx, m(v̇ + u r) = ΣFy and Iz ṙ = a Fyf − b Fyr, integrated with a semi-implicit Euler step at 240 Hz. The lateral force of an axle follows the slip angle α = atan(vlat/vlon) − δ through Fy = −Fymax tanh(Cα N α / Fymax) with Fymax = √((μN)2 − Fx2): the longitudinal and lateral tyre forces together can never exceed the friction circle μN, so braking or accelerating in a corner takes grip away. Axle loads include load transfer, Nf,r = m(g b,a ∓ ax h)/L.
Engine, drag and top speed
Drive force is P/v (constant power) capped by the traction limit μNrear; resistance is ½ρ Cd A v2 + Crr m g. Top speed is the root of that balance, which the page solves independently and draws as the dashed line in the speed graph. The handbrake locks the rear wheels so the friction force opposes the patch velocity vector (a drift).
Kicking a rock: impulse and restitution
A prop is a disc; the truck is an oriented box. At contact the normal impulse is j = (1+e) vrel / (1/M + 1/m + (r×n)2/Iz), which conserves linear momentum and gives the separation speed e vrel. For a central head-on hit the rock leaves at (1+e) M u/(M+m). Rocks (80 kg, e = 0.25), crates (25 kg, e = 0.1) and lava boulders (900 kg, e = 0.3) then slide against ground friction μg = 0.7.
Ramps and flight
A kicker ramp of height H and length L is a wedge; on it gravity pulls horizontally with g s/(1+s2) (s = H/L), so the lip speed is ulip2 = u02 − 2gH/(1+s2). After the lip the truck is ballistic: t = (vz + √(vz2 + 2gH))/g with vz = s ulip. Landing load is estimated as 1 + vz2/(2 · 0.25 m · g) (the suspension stroke absorbs the impact).
Radiant heat from the lava
A vent of radius R and crust temperature Tc radiates q = εσ(Tc4 − Tamb4); the truck, at distance d, receives the fraction F = R2/(R2 + d2) (the view factor of a small surface facing the disc: an upper bound). The hot components obey C dT/dt = α q F A − (h0 + h1 v) As (T − Tamb), and engine power fades linearly between 100 and 160 °C.
Honest simplifications: the dynamics are planar plus a vertical state (no suspension travel, wheel hop or rollover); the ground is flat except for the wedge ramps; tyres use a one-parameter saturation curve, not a measured Pacejka fit; props are discs without rotation inertia; the heat model lumps the hot parts into one thermal mass (40 kJ/K is a game-scale value) and ignores shadowing; vent temperatures and the 5 kW/m2 ring are illustrative. Landing load and heat values are indicative, not engineering data. Inanimate objects only.
What to try
- Press Full-throttle run: the speed curve flattens at the dashed closed-form top speed, then falls as the engine heats.
- Choose Slick volcanic ash, accelerate and steer: the friction-circle graph shows the rear axle hitting its limit and the truck oversteers.
- Kick-a-rock run at 30 and then at 90 km/h: the rock speed matches (1+e)Mu/(M+m) and the car loses only a few km/h.
- Ramp jump run in Moon gravity: the same ramp throws the truck about 6 times farther.
- Drive close to a vent with the Hot crust preset and watch the body temperature climb and the power fade.