⟳CENTRIFUGAL PUMP DYNAMICSHydraulic performance & cavitation laboratory
Offline-ready · 8 interactive modules
MySimulator · Engineering & fluid mechanics

Hydraulic performance, from impeller to operating point.

Investigate how rotational speed, impeller diameter, system resistance and suction conditions determine pump delivery, head, efficiency, energy demand and cavitation risk. All eight laboratories share one deterministic scientific engine. Use the module navigation to carry the same parameter scenario from one experiment to another.

Pump affinity lawsPump & system curvesHydraulic powerNPSH & cavitationCSV export
REFERENCE SPEED1,450rpm
REFERENCE IMPELLER0.22m diameter
REFERENCE BEP FLOW60m³/h
MODEL TYPESteadysingle-stage pump
01 / VISUAL LAB

Cross-section Laboratory

Explore the impeller, volute, suction and discharge paths with live operating measurements.

02 / ANALYTICAL LAB

Analytical Graph Laboratory

Plot pump and system curves, operating point and efficiency against flow rate.

03 / EXPERIMENT

Experiment Laboratory

Run a valve-opening sweep and record the response of the hydraulic system.

04 / COMPARISON

Comparison Laboratory

Compare four pump configurations with a common set of performance indicators.

05 / MATHEMATICS

Mathematical Model Explorer

Inspect affinity laws, power balance, efficiency and suction-side calculations.

06 / DESIGN TASK

Engineering Challenge Mode

Meet a delivery specification while satisfying power and cavitation constraints.

07 / DATA

Data Analysis & Report

Generate parameter sweeps, review datasets and export CSV and report files.

08 / DIAGNOSTICS

Cavitation Diagnostic Laboratory

Compare NPSH available and required and diagnose suction-side limitations.

Made with 🤖 ChatGPT · Three.js