Internal hive temperature, colony stress and escaped foragers for a loaded hive trailer.
Runs the escape-counter rule of the 3D lab for 600 s of simulated travel in four scenarios and compares the count with the predicted rate; also verifies the heat balance T_i = T_amb + M - C and the daytime-only escape condition.
Not run yet.
The science
What the model says. The 3D lab uses a simple heat-balance and stress model, and this 2D page uses exactly the same formulas. With f = 1 for open travel screens (0.15 for closed), n hives and road speed v (mph): cooling C = 9 · min(v/70, 1) · f °C, metabolic heat M = 2.1 · n · (1 − 0.55 f) °C, and internal hive temperature Ti = Tamb + M − C (kept between Tamb−2 and 55 °C).
Colony stress index (0-100). S = 55·clamp((Ti−28)/16, 0, 1) + 22·min(v/70, 1) + D, where D = 26 for daytime travel with screens open, 12 for daytime with screens closed and 0 at night. Escaped foragers appear only in daytime with screens open, at roughly 0.3 + 0.9·max(S/100, 0.05) per second.
What this 2D view shows. A side cutaway of the loaded trailer (hive colour = internal temperature, bees circle the entrances, air streaks pass through the screens) and two graphs: internal temperature against road speed with screens open and closed, and stress index against ambient temperature for night and day.
Honest simplifications. These are teaching heuristics, not a validated thermal model: the coefficients are chosen to show the trade-offs a migratory beekeeper weighs (heat build-up when sealed, escapes in daylight, vibration), with no real airflow, humidity, comb or brood-heat physics. Real moves also need screens that stay bee-proof, strapped hives, and a stop for ventilation checks; follow current national beekeeping guidance for any real move.