Presets
Playback
Ore and charge
Process temperatures and air
Emission control
Camera
Layers
Quality
Model check
The science
What this is
An educational model of primary lead production in a large, licensed industrial plant: sinter roasting of galena concentrate, reduction in a shaft (blast) furnace, and the gas cleaning that makes the process acceptable. It is a process-engineering lesson about mass balance, energy balance and thermodynamics. It is not a recipe and not something to attempt outside a regulated plant.
Roasting
2 PbS + 3 O2 -> 2 PbO + 2 SO2. From formation enthalpies (PbS -100.4, PbO -219.0, SO2 -296.8 kJ/mol) the reaction releases 415.4 kJ per mole of PbS, so a well-fed roast can heat itself. All the sulfur ends up as SO2 in the gas: the richer that gas (more than about 4 vol %), the cheaper it is to turn into sulfuric acid instead of releasing it. Sulfur left in the sinter later forms matte (lead sulfide) or reacts as PbS + 2 PbO -> 3 Pb + SO2.
Reduction and the Ellingham diagram
An Ellingham line is the standard Gibbs energy of forming an oxide per mole of O2: dG0 = dH0 - T dS0. A metal can reduce an oxide whose line lies above its own. The Pb/PbO line crosses the C to CO line at about 570 K, so carbon (really CO from the coke) reduces PbO easily at furnace temperatures; zinc oxide needs much more, which is why zinc stays in the slag. For PbO + CO -> Pb + CO2 the equilibrium constant is K = exp(-dG0/RT), huge at 1200 C, so the real limits are kinetics, slag chemistry and heat, not equilibrium.
Mass and energy balance
Lead in the ore = bullion + lead in slag + lead in matte + dust escaping the stack (captured dust is recycled to the sinter feed). Sulfur in the ore = SO2 + sulfur in matte. The furnace heat ledger adds the net reduction enthalpy (+108.5 kJ per mole of PbO reduced by carbon), heating and melting of slag and metal, charge heating and 15 % losses; coke supplies about 17.5 MJ per kg of carbon (35 % burnt to CO2, 65 % to CO). Coke short of this ledger means a cold hearth and more lead lost to the slag.
Honest simplifications
Sulfur removal, slag lead content, matte split and fume loss are empirical smooth curves tuned to textbook magnitudes, not a plant simulation. The Ellingham lines are linear fits for roughly 600-1500 K. The stack limits (400 mg/Nm3 SO2, 1 mg/Nm3 lead) are illustrative values; real permits differ by country and plant. Slag, matte and speiss chemistry, zinc, arsenic and cadmium, wet or electrostatic gas cleaning stages and the newer flash and bath smelting routes are left out.
Pollution control and safety
Lead is a cumulative neurotoxin and SO2 is a respiratory irritant that forms acid rain, so real smelters rely on sealed hoods, negative-pressure ducts, bag-house filters for fume and dust, an acid plant or scrubber for SO2, wastewater treatment, continuous stack monitoring, worker blood-lead programmes, respirators and strict hygiene. Molten metal, hot slag and CO gas are lethal hazards. Smelting lead at home is dangerous and illegal in most places; this page is for understanding industry, not for copying it.
What you see
Orange gas is the SO2-rich roast gas, grey gas is furnace gas, both pass the baghouse and the acid plant before the stack. The furnace glow follows the hearth temperature and the coke supply; the plume stays thin and white when emissions are within the illustrative limits and turns thick and yellow-brown when they are not. Animation speed is display only: all numbers are hourly rates.