Presets
Playback
Apparatus
Model checks
The science
What is modelled
A goat stands on a rock slab. Two things can go wrong: the hooves can slip because the friction needed exceeds what the rock gives, or the whole body can topple about its downhill hooves because the vertical line through the centre of mass leaves the base of support.
Equations
- Friction cone:
f ≤ μs NwithN = m g cosθ,f = m g sinθ, so the hooves slip atθ = arctan μs + ε, where ε is the foothold tilt. - Sliding:
a = g (sinθ − μk cosθ)withμk = 0.85 μs,s = ½ a t². - Tip-over:
h tan(θ − ε) > d, with h the centre-of-mass height and d its distance to the downhill hooves; after thatI φ″ = τas a rigid pendulum. - Climbing power
P = m g v sinθ; metabolic powerP / 0.25.
Checks run in the page
- The friction-cone angle by bisection and its independence of mass.
- Sliding distance by numerical integration against the formula.
- The tip-over angle by bisection and the sign of the torque either side of it.
- Energy conservation while the rigid body topples.
Honest simplifications
The goat is one rigid body with a fixed pose; real animals shift weight, use dew claws and soft hoof pads, and move dynamically. The friction values are typical illustrative numbers, not measurements of a particular rock. Sliding is modelled on the smooth slab once a hoof leaves its ledge.
What to try
- Press Wet slab slips and watch the goat slide, then Ledges save it to see the foothold tilt add to the slip angle.
- Press Steep, grippy: tips over, then Crouch to survive: lowering the body and spreading the legs postpones toppling.
- Press Across the slope and note how little room there is across the track.