Scientific simulation family · acoustics / fluid mechanics

Acoustic levitation
without contact.

Explore how a high-intensity ultrasonic standing wave creates time-averaged acoustic radiation forces that can trap a small particle against gravity. Eight connected laboratories use the same idealised Gor'kov-potential model, so an experiment configured in one module can be reproduced in another.

8interactive laboratories
1-Dshared physical model
SIconsistent units
Offlineno external libraries
pressure nodepressure node time-averaged trapping landscape

Shared experiment parameters

Change the baseline experiment here. These values travel with every module link and can also be exported as a JSON scenario.

20–80 kHz · air sound speed fixed at 343 m/s
100–4,000 Pa peak · not RMS pressure
50–800 μm · Rayleigh approximation checked with ka
Density and compressibility are updated with the material preset.

Live model readout

Calculated from the shared scenario.

Wavelength—mm
Levitation ratio—Fmax / weight
Equilibrium—mm from antinode
Size parameter—ka ≤ 0.3 preferred
Calculating shared experiment…

Eight complementary laboratories

Each module has a distinct learning objective and visual method.

01–08 · connected
LAB 01 · SPATIAL PHYSICS

Standing-wave cross-section

Inspect the levitator cavity, pressure nodes, velocity antinodes and particle trap location.

Open laboratory ↗
LAB 02 · ANALYTICAL PLOTS

Acoustic field graphs

Plot RMS pressure, RMS velocity, Gor'kov potential and radiation force across one half-wavelength.

Open laboratory ↗
LAB 03 · DYNAMICS

Particle experiment bench

Release a particle and integrate its motion under radiation force, gravity and Stokes drag.

Open laboratory ↗
LAB 04 · MATERIAL SCIENCE

Particle comparison

Compare material contrast factors, particle size and the acoustic force-to-weight balance.

Open laboratory ↗
LAB 05 · MATHEMATICAL MODEL

Equation explorer

Unpack the Gor'kov potential and derive the force, gravity ratio, trap stiffness and validity limits.

Open laboratory ↗
LAB 06 · DESIGN CHALLENGE

Levitation challenge

Meet a randomly generated trapping target while keeping the particle within the Rayleigh regime.

Open laboratory ↗
LAB 07 · MEASUREMENT

Data analysis & report

Sample the field, inspect a measurement table, identify equilibrium and export reproducible CSV data.

Open laboratory ↗
LAB 08 · INVERSE DESIGN

Levitation system designer

Calculate the pressure amplitude required for a target safety factor and transfer the design back to the family.

Open laboratory ↗

Scientific scope & assumptions

What this model includes — and what it deliberately leaves out.

Core physical model

U(x) = Vₚ [ (f₁ κ₀ / 2) ⟨p²⟩ − (3 f₂ ρ₀ / 4) ⟨v²⟩ ]
Fᵣₐd(x) = −dU/dx
m ẍ = Fᵣₐd − mg − 6πμa ẋ

A plane, one-dimensional standing wave in air; a small spherical particle; time-averaged first-order acoustic fields; linear Stokes drag.

Important limitations

This is an educational idealisation, not a validated hardware design tool. The Rayleigh-particle Gor'kov approximation is most credible when ka is small (the interface flags ka > 0.3). Acoustic streaming, viscous boundary layers, nonlinear propagation, finite transducer geometry, thermal effects, particle-particle interactions and three-dimensional stability are not modelled.
Made with 🤖 ChatGPT