Laboratory 08 · Inverse design
Levitation system designer
Work backwards from a target force margin. The inverse solver calculates the peak acoustic pressure amplitude required to support a selected particle with a chosen levitation ratio.
Design requirements
Choose the particle and acoustic frequency. The solver finds the pressure amplitude needed for the specified force margin.
The target ratio is max upward radiation force divided by particle weight. A value above 1 indicates a static force-balance point; additional margin provides headroom in this idealised model.
Calculated acoustic design
Analytical pressure solution for the shared one-dimensional standing wave.
Required peak pressure—Pa
Equivalent SPL—dB re 20 μPa RMS
Wavelength—mm
Size parameter—ka
Force budget at the design point
Target acoustic force compared with gravity.
Particle weight—μN
Required peak force—μN
Equilibrium position—mm from lower end
Rayleigh check—preferred ka ≤ 0.3
—
Inverse relation
Fₘₐₓ ∝ pₐ² · Vₚ · k · (4f₁ + 6f₂)
pₐ,required = √[ (target ratio × m g) / Fₘₐₓ(pₐ = 1 Pa) ]
pₐ,required = √[ (target ratio × m g) / Fₘₐₓ(pₐ = 1 Pa) ]
The pressure amplitude scales with the square root of the target force ratio. The result is an ideal-model requirement, not a transducer electrical drive voltage or a guarantee of a real-world trap.